Electronic Components Datasheet Search |
|
MHI1048S-05.1BRWI8 Datasheet(PDF) 2 Page - MicroPower Direct, LLC |
|
MHI1048S-05.1BRWI8 Datasheet(HTML) 2 Page - MicroPower Direct, LLC |
2 / 2 page www.micropowerdirect.com MicroPower Direct We Power Your Success - For Less! 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com Mechanical Dimensions Pin Single Output 1-VIN 7 No Connection 8 No Connection 9+VOUT 10 -VOUT 16 +VIN Pin Connections Notes: • All dimensions are typical in inches (mm) • Tolerance x.xx = ±0.02 (±0.50) Pin Dual Output 1-VIN 7 No Connection 8 Common 9+VOUT 10 -VOUT 16 +VIN Model Selection Guide Model Number Input Output Efficiency (%, Typ) Reflected Ripple (mA) Capacitive Load (µF, Max) Fuse Rating Slow-Blow (mA) Voltage (VDC) Current (mA) Voltage (VDC) Current (mA, Max) Current (mA, Min) Nominal Range Full-Load No-Load MHI1012S-05BRWI8 12 9.0 - 18.0 889 30 5.0 1,600 0.0 75 12.0 1,000 2,000 MHI1012S-05.1BRWI8 12 9.0 - 18.0 919 30 5.1 1,600 0.0 74 10.0 1,000 2,000 MHI1012S-12BRWI8 12 9.0 - 18.0 1,057 30 12.0 835 0.0 79 10.0 470 2,000 MHI1012D-12BRWI8 12 9.0 - 18.0 1,042 30 ±12.0 ±417 ±0.0 80 10.0 220 2,000 MHI1012D-15BRWI8 12 9.0 - 18.0 1,028 30 ±15.0 ±333 ±0.0 81 10.0 220 2,000 MHI1024S-05BRWI8 24 18.0 - 36.0 548 20 5.0 1,600 0.0 76 12.0 1,000 1,000 MHI1024S-05.1BRWI8 24 18.0 - 36.0 567 20 5.1 1,600 0.0 75 10.0 1,000 1,000 MHI1024S-12BRWI8 24 18.0 - 36.0 522 20 12.0 835 0.0 80 10.0 470 1,000 MHI1012D-12BRWI8 24 18.0 - 36.0 516 20 ±12.0 ±417 ±0.0 81 10.0 220 1,000 MHI1012D-15BRWI8 24 18.0 - 36.0 508 20 ±15.0 ±333 ±0.0 82 10.0 220 1,000 MHI1048S-05BRWI8 48 36.0 - 75.0 274 10 5.0 1,600 0.0 76 12.0 1,000 600 MHI1048S-05.1BRWI8 48 36.0 - 75.0 283 10 5.1 1,600 0.0 75 10.0 1,000 600 MHI1048S-12BRWI8 48 36.0 - 75.0 261 10 12.0 835 0.0 80 10.0 470 600 MHI1048D-12BRWI8 48 36.0 - 75.0 258 10 ±12.0 ±417 ±0.0 81 10.0 220 600 MHI1048D-15BRWI8 48 36.0 - 75.0 254 10 ±15.0 ±333 ±0.0 82 10.0 220 600 Notes: 1. The specified maximum capacitive load is for each output. 2. Load regulation is measured over a range of 15% IOUT to 100% IOUT. 3. When measuring output ripple & noise, it is recommended that an external capacitor (0.47 µF typ.) be placed from the +VOUT to the -VOUT pins for single output units and from each output to common for dual output models.To further reduce output ripple, a 3.3 µF is recommended. 4. Transient recovery is measured to within a 1% error band for a load step change of 75% to 100%. 5. The converter should be connected to a low ac-impedance source. An input source with a highly inductive impedance may affect the stability of the converter. In applications where the converter output loading is high and input power is supplied over long lines, it may be necessary to use a capacitor on the input to insure start-up. In this case, it is recom- mended that a low ESR (ESR <1.0 at 100 kHz) capacitor be mounted close to the converter. For 12V input units a 10 µF is recommended; for 12V input units, a 4.7 µF; and for 24V units a 2.2 µF. 6. Operation at no-load will not damage the unit, but they may not meet all specifications. 7. It is recommended that a fuse be used on the input of a power supply for protection. See the Model Selection tables for the correct rating. Derating Curve IGBT Applications Notes: The MHI1000x-xxB series is a good choice for applications involving high speed switching, such as driving IGBTs. They are designed to withstand the extra stress caused by the high voltage switching transients present in IGBT drive circuits. All of the MHIxxx series have isolation levels that range from 5.2 to 8 kV. Many of these have reinforced insulation. The high isolation levels (and the correspond- ingly low capacitive coupling rates) allow them to be safely used in applications with highly dynamic switched AC or DC. |
Similar Part No. - MHI1048S-05.1BRWI8 |
|
Similar Description - MHI1048S-05.1BRWI8 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |