48

sProduct Specifications

sMaterial

Rating

Current rating 0.15A

Voltage rating 30V AC

Remarks

UL 94V-0

————

————

Part

Material

Finish

Insulator

Contact

Metal fitting

LCP

Phosphor bronze

Bronze

Color : Beige

Color : Black

Tin-lead plating

Tin-lead plating

Applicable FPC

t=0.2±0.03

Tin-lead plating (Note 4)

sOrdering Information

FH18

- 27S - 0.3 SHW (05)

1

2

3

4

5

Series name

FH18

Number of contacts

17, 21, 25, 27, 39, 45, 51

Contact pitch

0.3mm

Contact style

SHW : SMT horizontal mounting type

Plating specifications No symbol : Tin-lead plating

(05) : Gold plating

1

2

3

4

5

Storage temperature range

-10ç to +50ç (Note 2)

Storage humidity range

Relative humidity 90% max.

(without condensation)

Operating temperature range

-40ç to +85ç (Note 1)

Operating humidity range

Relative humidity 90% max.

(without condensation)

100V DC

90V AC/1 minute

10 cycles

1mA

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,

2 hours in each of the 3 directions.

sine half-wave waveform, 3 cycles in each of the 3 axis.

96 hours at temperature of 40ç and humidity of 90% to 95%

5 cycles under conditions as follows; Temperature:

-40ç / 15 to 35ç / 85ç / 15 to 35ç,

Time: 30 / 5max. / 30 / 5 max.(minutes)

Reflow: At the recommended temperature profile

Manual soldering: 350±5ç for 3 seconds

Item

1.Insulation resistance

2.Withstanding voltage

4.Durability

(Insertion/withdrawal)

3.Contact resistance

5.Vibration

6.Shock

7.Humidity

(Steady state)

8.Temperature cycle

9.Resistance to

soldering heat

Specification

50M ohms minimum

No flashover or insulation breakdown.

100m ohms maximum

Contact resistance : 100m ohms maximum

No damage, cracks, or parts dislocation.

No electrical discontinuity of 1µs or more

Contact resistance: 100m ohms maximum

No damage, cracks, or parts dislocation.

No electrical discontinuity of 1µs or more

Contact resistance: 100m ohms maximum

No damage, cracks, or parts dislocation.

Contact resistance: 100m ohms maximum

Insulation resistance: 50M ohms minimum

No damage, cracks, or parts dislocation.

Contact resistance: 100m ohms maximum.

Insulation resistance: 50M ohms minimum.

No damage, cracks, or parts dislocation.

No deformation of components affecting performance.

Conditions

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation.

Note 3: When FPC is gold plated, the connector contacts should be also gold plated: Select the (05) specification.