A2

Single Slot SMT Connectors For Card-Bus Based PC Cards

IC11S Series

PC Card Standard Compliant

Reduced height : 5.6mm high

Wide variety of options

(1)Board Mounting

(2)Types of eject button

(3)Position of eject buttons

(4)Standoffs

sFeatures

1. PC Card Standard compliant:

• Grounding is required to meet the high speed signal

requrements of the PC card standard. Grounding reliability is

achieved with a grounding plate and 8 grounding contacts.

• Terminals for ground clipping are provided.

2. Space saving

Smaller size reduces occupied area on PC boards as

compared to previous products.

3. Reduced Height:

Connector height is minimized to 5.6mm, making possible

thinner product designs.

4. Eject mechanism with high-level functionality

Hirose Electric's original ejection mechanism provides an

higher degree of card ejection over existing products. This

improves the operational qualities of card removal. (Patents

pending)

5. Wide Variety of Options Available

• Standard type mounts to the top of the PC board and reverse

type mounts on the underside of the board

• Three types of eject buttons; rigid, flexible and POP-UP.All

types can be installed on the right or left side of the ejector.

• Available with standoff to utilize space under the connector for

mounting other parts.

6. Light-weight

Weight of 12.7g for normal button type helps achieve the

reduced weight required in today’s products.