(5/10)

20150203 / beads_commercial_power_mpz1005-e_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

EMC Components

MPZ1005-E Type

MATERIAL CHARACTERISTICS

S material: Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in

which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz.

A material: This high-impedance product is based on the impedance frequency characteristics of our Y-material. The product offers

excellent impedance characteristics, which is greater than 2500

:, in the vicinity of 100MHz range (MMZ1608A252B).

D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies.

Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.

F material: This new product inherits the characteristic of our D-material, namely its sharp impedance rise time, and its impedance peak

frequency has been shifted higher into range. The product offers excellent noise suppression from 600MHz to as high as in

the GHz range.

TYPICAL MATERIAL IMPEDANCE CHARACTERISTICS

 

0

500

1000

1500

2000

2500

10

100

1000

Frequency(MHz)

S

A

D

F