cui.com

CUI Inc

│ SERIES: P7805-S │ DESCRIPTION: NON-ISOLATED SWITCHING REGULATOR

date 02/19/2015

│ page 5 of 6

1

3

2

+Vin

GND

-Vout

C2

GND

1

2

3

+Vout

C1

C3

C4

LDM

Part Number

C1, C3

(ceramic capacitor)

C2, C4

(ceramic capacitor)

P7805-Q24-S1R5-S

10μF/50V

10μF/6.3V

P7805-Q24-S1R8-S

10μF/50V

10μF/6.3V

P7805-Q24-S2-S

10μF/50V

10μF/6.3V

P7805-Q24-S3-S

10μF/50V

10μF/6.3V

P7805-Q24-S5-S

10μF/50V

10μF/10V

P7805-Q24-S6-S

10μF/50V

10μF/16V

P7805-Q24-S9-S

10μF/50V

10μF/16V

P7805-Q24-S12-S

10μF/50V

10μF/25V

P7805-Q24-S15-S

10μF/50V

10μF/25V

External Capacitor Table

TYPICAL APPLICATION CIRCUIT

Positive Output Application Circuit

Negative Output Application Circuit

Positive and Negative Output Paralleling Application Circuit

+Vin

GND

GND

1

2

3

+Vout

C1

C2

+Vin

GND

GND

1

2

3

-Vout

C1

C2

Note:

1. When the products used as negative output and the input-voltage under (Vin-min+2V), C1 and C2 must be added in the circuit, and they should be placed as near as the

products' footprints. Others apply to the application-environment.

2. The capacitance of C1, C2, see external circuit table, can be increased if required, and tantalum or low ESR electrolytic capacitors may also suffice.

3. When the products used as the circuit like figure 4, an inductor named as LDM up to 10μH is recommended in the circuit to reduce the mutual interference.

4. For models ≤ 3.3 V

5. Cannot use in parallel for output and hot swap for input.

Note:

1. Max. capacitive load tested at input voltage range and full load.

2. All specifications measured at: Ta=25°C, humidity<75%, nominal input voltage and rated output load, unless otherwise specified.

Figure 2

Figure 4

Figure 3

For more information, please visit the product page.