Electronic Components Datasheet Search |
|
RKMWV-LEDA3-06-10M Datasheet(PDF) 8 Page - Lumberg |
|
RKMWV-LEDA3-06-10M Datasheet(HTML) 8 Page - Lumberg |
8 / 178 page 1-717-217-2299 www.lumberg-automationusa.com 8 Enclosure~less Wiring Solution for On-Machine Applications Legend 1. Passive Distribution Boxes Many styles to choose from. 4-, 6-, or 8-ports, top or side entry, with on-board, homerun cable, or quick-disconnect connector. 2. Cordsets Single- and Double-Ended Cordsets provide connection between field devices and the ports of a distribution box or may be used to hardwire a device to a control panel or distribution box. 3. Receptacles Receptacles are connectors that mount in a fixed location (sensor or panel) and mate with a molded cable. 4. Field Attachable Connectors Used to complete the assembly of a single-ended cordset. Field attachables are available in a variety of thread sizes and number of poles, straight and right-angle or to make cordset repairs in the field. 5. DIN Valve Connectors Are mainly used with solenoid valves in hydraulic and pneumatic applications. In addition, these connectors are also used in electrical applications for pressure switches, filter switches, limit switches and special sensors. 6. Splitters Devices that provide the means of bringing two different sensor/actuator signals into a single port of an ASB distribution box, thereby doubling the capacity of the box. 7. Fieldbus I/O Blocks Have embedded communications protocol, e.g., DeviceNet, Profibus...) that allows them to actively communicate with the network interface at the PLC. 8. Fieldbus I/O Modular Bus Systems Are systems with bus-neutral I/O modules and communications adapters that allow the designer to mix and match field bus and I/O hardware components as needed for the application. 9. Bus Taps and Tees Connect drop lines to the main trunk line or combine power and signal using a hybrid cable. 10. Drop and Trunk Cordsets When connecting multiple devices to a single communications trunk, the trunk is split with a T-connector. The cable that connects the device to the main trunk is referred to as a drop cable. 11. Terminating Resistors Are placed at the end of a transmission line or daisy chain bus (such as in Devicenet), designed to match impedance and hence minimize signal reflections. Active/Passive Application Diagram |
Similar Part No. - RKMWV-LEDA3-06-10M |
|
Similar Description - RKMWV-LEDA3-06-10M |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |