© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com

C1087_U2J_FT-CAP_SMD • 6/7/2016

2

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

Flexible Termination System (FT-CAP), U2J Dielectric, 10 - 50 VDC (Commercial Grade)

Packaging C-Spec Ordering Options Table

Packaging/Grade

Ordering Code (C-Spec)

Bulk Bag/Unmarked

Not required (Blank)

7" Reel/Unmarked

TU

13" Reel/Unmarked

7411 (EIA 0603 and smaller case sizes)

7210 (EIA 0805 and larger case sizes)

7081

7082

1

Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging.

1

The terms “Marked” and “Unmarked” pertain to laser marking option of capacitors. All packaging options labeled as “Unmarked” will contain capacitors that have

not been laser marked. The option to laser mark is not available on these devices. For more information see “Capacitor Marking”.

2

The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size

devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”.

Benefits

• Operating temperature range of −55°C to +125°C

• Lead (Pb)-free, RoHS and REACH compliant

• EIA 0603, 0805, 1206, 1210 and 1812 case sizes

• DC voltage ratings of 10 V, 16 V, 25 V and 50 V

• Capacitance offerings ranging from 1.0 nF up to 470 nF

• Available capacitance tolerances of ±1%, ±2%, ±5%, ±10% and ±20%

• Low noise solution similar to C0G

• Low dissipation factor DF < 0.1%

• Low ESR & ESL

• High thermal stability

• High ripple current capability

• Preferred capacitance solution at line frequencies & into the MHz range

• Small predictable and linear capacitance change with respect to temperature

• Non-polar device, minimizing installation concerns

• 100% pure matte Tin-plated termination finish allowing for excellent solderability

• Retains 99% of nominal capacitance at full rated voltage

Applications

Typical applications include critical timing, tuning, circuits requiring low loss, circuits with pulse, high current, decoupling, bypass,

filtering, transient voltage suppression and blocking, as well as energy storage in critical and safety relevant circuits without (integrated)

current limitation, including those subject to high levels of board flexure or temperature cycling.

Preliminary Data Sheet