M655 Series

Performance Specifications

Integrated Circuit Systems

Integrated Circuit Systems, Inc.

Communications Modules

www.icst.com/Comm-Modules

tel: 508-852-5400

1

The M655 Series of Voltage Controlled SAW

Oscillators is a low cost solution for many Telecom

applications. An internal SAW filter provides jitter

performance of less than 0.5psec (rms).

This device is specified for an operating

temperature range of -40°C to +85°C. A disable

feature forces the output into a static condition by

applying a logic “0” to the clock enable input. The

oscillator is housed in a hermetically-sealed,

leadless surface mount package.

The M655 Series of VCOs is available over an

output frequency range of 155MHz to 900MHz.

The device is most suited for phase-locked loop

applications as well as clock and data recovery

circuits.

Clock Smoothing for OC192/OC48/

OC12/OC3

Clock Smoothing for STS96/STS48/

STS12/STS3/STS1

Frequency Translation

Clock and Data Retiming

ISO 9001

Registered

ISO 9001

Registered

M655 Series

Voltage Controlled SAW Oscillators

Output Frequencies at 155MHz to

900MHz

Low Phase Jitter, 0.5psec (rms) typical

3.3 Volt Supply Operation

Complementary Outputs

Output Disable Feature

LCC Surface Mount Package

(9 x 14mm)

APPLICATION

FEATURES

DESCRIPTION

Operating Temp. Range (Case): ........................ -40°C to +85°C

Storage Temp. Range (Ambient): .................... -55°C to +125°C

Output Current: ................................................................ 20 mA

Power Supply Voltage (Vcc): ................................ 0 to +3.6 Vdc

ABSOLUTE MAX RATINGS

9mm

14mm