Electronic Components Datasheet Search |
|
CC1021-RTR1 Datasheet(PDF) 9 Page - Texas Instruments |
|
CC1021-RTR1 Datasheet(HTML) 9 Page - Texas Instruments |
9 / 91 page Not Recommended for New Designs NRND CC1021 www.ti.com SWRS045D – JANUARY 2006 – REVISED JANUARY 2015 RF Transmit (continued) All measurements were performed using the two-layer PCB CC1020EMX reference design. See Figure 6-1. The electrical specifications given for 868 MHz are also applicable for 902 to 928 MHz. TA = 25°C, AVDD = DVDD = 3.0 V, fC = 14.7456 MHz if nothing else stated. PARAMETER MIN TYP MAX UNIT CONDITION 433 MHz 54 + j44 Ω Optimum load Transmit mode. For matching details 868 MHz 15 + j24 Ω impedance see Section 5.11. 915 MHz 20 + j35 Ω 4.5 RF Receive All measurements were performed using the two-layer PCB CC1020EMX reference design. See Figure 6-1. The electrical specifications given for 868 MHz are also applicable for 902 to 928 MHz. TA = 25°C, AVDD = DVDD = 3.0 V, fC = 14.7456 MHz if nothing else stated. PARAMETER MIN TYP MAX UNIT CONDITION 38.4 kHz channel filter BW (1) –109 dBm Sensitivity is measured with PN9 sequence at BER = 10−3 102.4 kHz channel filter BW (2) –104 dBm Receiver Sensitivity, (1) 38.4 kHz receiver channel filter 433 MHz, FSK 102.4 kHz channel filter BW (3) –104 dBm bandwidth: 4.8 kBaud, NRZ coded data, ±4.95 kHz frequency 307.2 kHz channel filter BW (4) –96 dBm deviation. 38.4 kHz channel filter BW (1) –108 dBm (2) 102.4 kHz receiver channel filter bandwidth: 19.2 kBaud, NRZ 102.4 kHz channel filter BW (2) –103 dBm coded data, ±19.8 kHz frequency 102.4 kHz channel filter BW (3) –103 dBm deviation. (3) 102.4 kHz receiver channel filter bandwidth: 38.4 kBaud, NRZ coded data, ±19.8 kHz frequency Receiver Sensitivity, deviation. 868 MHz, FSK (4) 307.2 kHz receiver channel filter bandwidth: 153.6 kBaud, NRZ 307.2 kHz channel filter BW (4) –94 dBm coded data, ±72 kHz frequency deviation. See Table 5-6 and Table 5-7 or typical sensitivity figures at other channel filter bandwidths. 9.6 kBaud –103 dBm Manchester coded data. Receiver sensitivity, See Table 5-14 for typical 433 MHz, OOK 153.6 kBaud –81 dBm sensitivity figures at other data 9.6 kBaud –104 dBm rates. Sensitivity is measured with Receiver sensitivity, PN9 sequence at 868 MHz, OOK 153.6 kBaud –87 dBm BER = 10−3 Saturation FSK: Manchester/NRZ coded data (maximum input FSK and OOK 10 dBm OOK: Manchester coded data level) BER = 10−3 The receiver channel filter 6 dB bandwidth is programmable from System noise 38.4 to kHz 38.4 kHz to bandwidth 307.2 307.2 kHz. See Section 5.9.2 for details. Noise figure, 433 and 868 MHz 7 dB NRZ coded data cascaded –23 dBm LNA2 maximum gain 433 MHz, 102.4 kHz –18 dBm LNA2 medium gain channel filter BW –16 dBm LNA2 minimum gain Input IP3(1) –18 dBm LNA2 maximum gain 868 MHz, 102.4 kHz –15 dBm LNA2 medium gain channel filter BW –13 dBm LNA2 minimum gain Co-channel Wanted signal 3 dB above the 433 MHz and 868 MHz, rejection, FSK and –11 dB sensitivity level, CW jammer at 102.4 kHz channel filter BW OOK operating frequency, BER = 10−3 (1) Two tone test (+10 MHz and +20 MHz) Copyright © 2006–2015, Texas Instruments Incorporated Specifications 9 Submit Documentation Feedback Product Folder Links: CC1021 |
Similar Part No. - CC1021-RTR1 |
|
Similar Description - CC1021-RTR1 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |