Electronic Components Datasheet Search |
|
MAX3238IPWRQ1 Datasheet(PDF) 4 Page - Texas Instruments |
|
MAX3238IPWRQ1 Datasheet(HTML) 4 Page - Texas Instruments |
4 / 18 page MAX3238Q1 3V TO 5.5V MULTICHANNEL RS232 LINE DRIVER/RECEIVER WITH ±15kV ESD (HBM) PROTECTION SLLS569B − MAY 2003 − REVISED APRIL 2008 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC (see Note 1) −0.3 V to 6 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Positive output supply voltage range, V+ (see Note 1) −0.3 V to 7 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Negative output supply voltage range, V− (see Note 1) 0.3 V to −7 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Supply voltage difference, V+ − V− (see Note 1) 13 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input voltage range, VI: Driver (FORCEOFF, FORCEON) −0.3 V to 6 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Receiver −25 V to 25 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Output voltage range, VO: Driver −13.2 V to 13.2 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Receiver (INVALID) −0.3 V to VCC + 0.3 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Package thermal impedance, θJA (see Notes 2 and 3):DB package 62 °C/W . . . . . . . . . . . . . . . . . . . . . . . . . . . PW package 62 °C/W . . . . . . . . . . . . . . . . . . . . . . . . . . . Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260 °C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Storage temperature range, Tstg −65 °C to 150°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltages are with respect to network GND. 2. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. 3. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions (see Note 4 and Figure 6) MIN NOM MAX UNIT Supply voltage VCC = 3.3 V 3 3.3 3.6 V Supply voltage VCC = 5 V 4.5 5 5.5 V VIH Driver and control high-level input voltage DIN, FORCEOFF, FORCEON VCC = 3.3 V 2 V VIH Driver and control high-level input voltage DIN, FORCEOFF, FORCEON VCC = 5 V 2.4 V VIL Driver and control low-level input voltage DIN, FORCEOFF, FORCEON 0.8 V VI Driver and control input voltage DIN, FORCEOFF, FORCEON 0 5.5 V VI Receiver input voltage −25 25 V TA Operating free-air temperature MAX3238I −40 85 °C NOTE 4: Testing supply conditions are C1−C4 = 0.1 µF at VCC = 3.3 V ± 0.15 V; C1−C4 = 0.22 µF at VCC = 3.3 V ± 0.3 V; and C1 = 0.047 µF and C2−C4 = 0.33 µF at VCC = 5 V ± 0.5 V. electrical characteristics over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Note 4 and Figure 6) PARAMETER TEST CONDITIONS MIN TYP‡ MAX UNIT II Input leakage current FORCEOFF, FORCEON ±0.01 ±1 µA Auto-powerdown plus disabled No load, FORCEOFF and FORCEON at VCC 0.5 2 mA ICC Supply current (T = 25 C) Powered off No load, FORCEOFF at GND 1 10 ICC Supply current (TA = 25°C) Auto-powerdown plus enabled No load, FORCEOFF at VCC, FORCEON at GND, All RIN are open or grounded 1 10 µA ‡ All typical values are at VCC = 3.3 V or VCC = 5 V, and TA = 25°C. NOTE 4: Testing supply conditions are C1−C4 = 0.1 µF at VCC = 3.3 V ± 0.15 V; C1−C4 = 0.22 µF at VCC = 3.3 V ± 0.3 V; and C1 = 0.047 µF and C2−C4 = 0.33 µF at VCC = 5 V ± 0.5 V. |
Similar Part No. - MAX3238IPWRQ1 |
|
Similar Description - MAX3238IPWRQ1 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |