 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
OPA698ID Datasheet(PDF) 4 Page - Texas Instruments |
|
|
||||||||||||||||||||||||||||||
OPA698ID Datasheet(HTML) 4 Page - Texas Instruments |
|
|
4 / 32 page  OPA698 4 SBOS258D www.ti.com OUTPUT VOLTAGE LIMITERS (Cont.) Limited Step Response 2x Overdrive Overshoot VIN = 0 to ±2V Step 250 mV typ C Recovery Time VIN = ±2V to 0V Step 1 1.9 2 2.1 ns max B Linearity Guardband(9) f = 5MHz, VO = 2VPP 30 mV typ C THERMAL CHARACTERISTICS Temperature Range Specification: I –40 to +85 °C typ C Thermal Resistance Junction-to-Ambient DSO-8 125 ——— °C/W typ C NOTES: (1) Junction temperature = ambient for +25 °C specifications. (2) Junction temperature = ambient at low temperature limit; junction temperature = ambient +23 °C at high temperature limit for over temperature specifications. (3) Test levels: (A) 100% tested at +25 °C. Over temperature limits by characterization and simulation. (B) Limits set by characterization and simulation. (C) Typical value only for information. (4) Current is considered positive out of node. (5) CMIR tested as < 3dB degradation from minimum CMRR at specified limits. (6) IVH (VH bias current) is positive, and IVL (VL bias current) is negative, under these conditions. See Note 3, Figure 1, and Figure 8. (7) Limiter feedthrough is the ratio of the output magnitude to the sinewave added to VH (or VL) when VIN = 0. (8) VH slew rate conditions are: VIN = +2V, G = +2, VL = –2V, VH = step between 2V and 0V. VL slew rate conditions are similar. (9) Linearity Guardband is defined for an output sinusoid (f = 5MHz, VO = 0VDC ± 1VPP) centered between the limiter levels (VH and VL). It is the difference between the limiter level and the peak output voltage where SFDR decreases by 3dB (see Figure 9). ELECTRICAL CHARACTERISTICS: VS = ±5V (Cont.) Boldface limits are tested at +25 °C. G = +2, RF = 402Ω, RL = 500Ω, and VH = –VL = 2V (see Figure 1 for AC performance only), unless otherwise noted. OPA698ID TYP MIN/MAX OVER TEMPERATURE 0 °C to –40 °C to MIN/ TEST PARAMETER CONDITIONS +25 °C +25 °C(1) +70°C(2) +85°C(2) UNITS MAX LEVEL(3) |
Similar Part No. - OPA698ID |
|
Similar Description - OPA698ID |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.NET |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
