Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Conductive Polymer Aluminum Electrolytic Capacitors

W1

L

P

P

+

–

Cap.

Polarity bar (Positive)

R.V. code

Lot No.

Ω max.)

Surface Mount Type

Features

Specifications

Series

HX

Category temp. range

–55 °C to +125 °C

Rated voltage range

2 V.DC to 2.5 V.DC, 10 V.DC to 25 V.DC

Category voltage range

1.6 V.DC to 2 V.DC, 8 V.DC to 20 V.DC

Nominal cap.range

15 μF to 560 μF

Capacitance tolerance

±20 % (120 Hz/+20 °C)

DC leakage current

2 V.DC to 2.5 V.DC : I

< 0.1 CV (μA) 2 minutes, 10 V.DC to 25 V.DC : I < 0.3 CV (μA) 2 minutes

Dissipation factor (tan

d)

< 0.1 (120 Hz/+20 °C)

Surge voltage (V.DC)

Rated voltage

× 1.25 [2 V.DC to 16 V.DC], × 1.15 [20 V.DC to 25 V.DC](15 °C to 35 °C)

Endurance

+125 °C, 1000 h, rated voltage applied

Capacitance change

Within ±20 % of the initial value

tan

d

< 2 times of the initial limit

DC leakage current

Within the initial limit

Damp heat

(Steady state)

After storing for 500 hours at +60 °C, 90 %

Capacitance change of

initial measurd value

2 V.DC to 2.5 V.DC

10 V.DC to 25 V.DC

+70 %, –20 %

+60 %, –20 %

tan

d

< 2 times of the initial limit

DC leakage current

2 V.DC to 2.5 V.DC : Within the initial limit

10 V.DC to 25V DC :

< 3 times of the initial limit

Unit : mm

Series

L±0.2 W1±0.2 W2±0.1 H±0.1

P±0.3

HX

7.3

4.3

2.4

1.9

1.3

✽ Externals of figure are the reference.

Rated voltage mark

d

2 V.DC

e

2.5 V.DC

A

10 V.DC

C

16 V.DC

D

20 V.DC

E

25 V.DC

Marking

Dimensions (not to scale)

Nov. 2015

03