F2TVS10.0A thru F2TVS190A

Surface Mount Transient Voltage Suppressors

Peak Pulse Power 200W Stand-off Voltage 10.0 to 190V

www.goodark.com

1/5

2014.04-Rev.A

F2TVS10.0A thru F2TVS190A

Surface Mount Transient Voltage Suppressors

Peak Pulse Power 200W Stand-off Voltage 10.0 to 190V

Features

• Glass passivated junction

• Moisture sensitivity: level 1, per J-STD-020

• Solder dip 260 °C, 10 s

Solder dip 260 C, 10 s

• Low profile， typical thickness 1.0mm

• Polarity:Uni-directional

• Excellent clamping capability and Fast response time

• 200W peak pulse power capability with a 10/1000us waveform

T i l Aliti

eSGA

(SOD‐123FL)

Typical Applications

Use in sensitive electronics protection against voltage transients induced by inductive

load switching and lighting on Ics,MOSFET,signal lines of sensor units for consumer,

computer, industrial and telecommunication

Parameter

Symbol

Value

Unit

1)

Minimum 200

W

Peak pulse current with a

1)

Peak power dissipation with a

10/1000us waveform

Peak pulse current with a

10/1000us waveform

1)

See Next Table

A

Steady state power dissipation

on infinite heatsink

2)

0.5

W

Peak forward surge

current,8.3ms single half sine-

30.0

A

Maximum instantaneous forward

voltage at 25A

3.5

V

Notes:

1) Non-repetitive current,per fig.3 and derated above TA=25℃ per fig.4.

2) Power dissipation mounted on recommended pad layout

Operating junction and storage

temperature range

TJ, TSTG

-65 to +150

℃

g

Thermal resistance junction to

ambient air

Rthja

85

℃/W

2) Power dissipation mounted on recommended pad layout

3) Thermal resistance from junction to ambient,mounted on PCB with 5.0×5.0mm copper pads

www.goodark.com

1/5

2014.04-Rev.A