SPEC NO: DSAN8370

REV NO: V.2A

DATE: MAR/09/2015

PAGE: 3 OF 6

APPROVED: WYNEC

CHECKED: Allen Liu

DRAWN: L.Q.Xie

ERP: 1201008905

Selection Guide

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity/ luminous Flux: +/-15%.

*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Notes:

1.Wavelength: +/-1nm.

2.Forward Voltage: +/-0.1V.

3.Wavelength value is traceable to the CIE127-2007 compliant national standards.

4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or

premature failure.

Note:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

Part No.

Dice

Lens Type

Iv (mcd) [2]

@ 2mA

Viewing

Angle [1]

Min.

Typ.

2θ1/2

Super Bright Orange (AlGaInP)

Water Clear

120

220

120

°

*30

*60

AA3528LSESK/J4

Symbol

Parameter

Device

Typ.

Max.

Units

Test Conditions

λpeak

Peak Wavelength

Super Bright Orange

611

nm

λD [1]

Dominant Wavelength

Super Bright Orange

605

nm

Δλ1/2

Spectral Line Half-width

Super Bright Orange

17

nm

C

Capacitance

Super Bright Orange

27

pF

Forward Voltage

Super Bright Orange

1.8

2.1

V

Reverse Current

Super Bright Orange

10

uA

Min.

1.5

Parameter

Super Bright Orange

Units

Power dissipation

105

mW

DC Forward Current

50

mA

Peak Forward Current [1]

150

mA

Reverse Voltage

5

V

Operating Temperature

-40°C To +85°C

Storage Temperature

-40°C To +85°C