Note 4: For operating at elevated temperature, these devices must be derated based on a thermal resistance of

Note 5: These devices are available in both the commercial temperature range 0˚C

range is designated by the position just before the package type in the device number. A “C” indicates the commercial temperature range and an “M” indicates the

military temperature range. The military temperature range is available in “H” package only.

Note 7: The LF411A is 100% tested to this specification. The LF411 is sample tested to insure at least 90% of the units meet this specification.

duction test time, the input bias currents measured are correlated to junction temperature. In normal operation the junction temperature rises above the ambient tem-

if input bias current is to be kept to a minimum.

Note 9: Supply voltage rejection ratio is measured for both supply magnitudes increasing or decreasing simultaneously in accordance with common practice, from

Note 10: RETS 411X for LF411MH and LF411MJ military specifications.

Note 11: Max. Power Dissipation is defined by the package characteristics. Operating the part near the Max. Power Dissipation may cause the part to operate out-

side guaranteed limits.

Typical Performance Characteristics

Input Bias Current

DS005655-11

Input Bias Current

DS005655-12

Supply Current

DS005655-13

Positive Common-Mode

Input Voltage Limit

DS005655-14

Negative Common-Mode

Input Voltage Limit

DS005655-15

Positive Current Limit

DS005655-16

www.national.com

4