5

SN65HVD233-Q1, SN65HVD234-Q, SN65HVD235-Q1

www.ti.com

SLLSES4 – AUGUST 2016

Product Folder Links: SN65HVD233-Q1 SN65HVD234-Q SN65HVD235-Q1

Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values, except differential I/O bus voltages, are with respect to the network ground pin.

8 Specifications

8.1 Absolute Maximum Ratings

over operating ambient temperature range unless otherwise noted

(1) (2)

MIN

MAX

UNIT

Supply voltage

–0.3

7

V

Voltage at any bus terminal (CANH or CANL)

–36

36

V

Voltage input, transient pulse, CANH and CANL, through 100

Ω (see

Figure 18)

–100

100

V

Input voltage, (AB, EN, LBK, RS, TXD)

–0.5

7

V

Output voltage (RXD)

–0.5

7

V

Receiver output current

–10

10

mA

Operating junction temperature

–40

150

°C

Storage temperature

125

°C

(1)

AEC Q100-002 indicates that HBM stressing shall be in accordance with the ANSI/ESDA/JEDEC JS-001 specification.

8.2 ESD Ratings

VALUE

UNIT

Electrostatic discharge

Human-body model (HBM), per AEC

All pins except CANH,

CANL, and GND

±12 000

V

All pins

±3 000

Charged-device model (CDM), per AEC Q100-011

±1 000

(1)

Maximum ambient temperature operation is allowed as long as the device maximum junction temperature is not exceeded.

8.3 Recommended Operating Conditions

MIN

MAX

UNIT

Supply voltage

3

3.6

V

Voltage at any bus terminal (separately or common mode)

–7

12

V

High-level input voltage

EN, AB, LBK, TXD

2

5.5

V

Low-level input voltage

EN, AB, LBK, TXD

0

0.8

V

Differential input voltage between CANH and CANL

–6

6

V

Resistance from RS to ground

0

100

k

Ω

Input voltage at RS for standby

5.5

V

High-level output current

Driver

–50

mA

Receiver

–10

Low-level output current

Driver

50

mA

Receiver

10

–40

125

°C