LMV982MUTAG datasheet(8/21 Pages) ONSEMI

Part #	LMV982MUTAG

Description	Single and Dual Low Voltage, Rail-to-Rail Input and Output

Download	21 Pages

Scroll/Zoom	100%

Manufacturer	ONSEMI [ON Semiconductor]

Direct Link	http://www.onsemi.com

Logo

8 / 21 page

LMV981, LMV982

www.onsemi.com

8

5V DC ELECTRICAL CHARACTERISTICS Unless otherwise noted, all min/max limits are guaranteed for TA = 25°C, V+ = 5 V,

V− = 0 V, VCM = V+/2, VO = V+/2 and RL > 1 MW. Typical specifications represent the most likely parametric norm.

Parameter

Unit

Max

Typ

Min

Condition

Symbol

Output Short−Circuit

Current

IO

Sourcing, Vo = 0 V, VIN = +100 mV

40

60

mA

−40

°C to +125°C

40

Sinking, Vo = 5 V, VIN = −100 mV

45

65

−40

°C to +125°C

45

Shutdown Enable

Control

VSHDN

Turn−on Voltage to Enable Device

4.2

V

Turn−off Voltage to Shutdown Device

0.55

Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product

performance may not be indicated by the Electrical Characteristics if operated under different conditions.

8. Guaranteed by design and/or characterization.

5V AC ELECTRICAL CHARACTERISTICS Unless otherwise specified, all limits are guaranteed for TA = 25°C, V+ = 5 V, V− =

0 V, VCM = 2.0 V,Vo = V+/2 and RL > 1 MW. Typical specifications represent the most likely parametric norm.

Parameter

Symbol

Condition

Min

Typ

Max

Unit

Slew Rate

SR

(Note 9)

0.48

V/uS

Gain Bandwidth

Product

GBWP

1.5

MHz

Phase Margin

Qm

65

°

Gain Margin

Gm

8

dB

Input−Referred

Voltage Noise

en

f = 50 kHz, VCM = 2 V

50

nV/

√Hz

Total Harmonic

Distortion

THD

f = 1 kHz, AV = +1, RL = 600 W, VO = 1 VPP

0.022

%

Amplifier−to−

Amplifier Isolation

(Note 10)

123

dB

9. Connected as voltage follower with input step from V− to V+. Number specified is the slower of the positive and negative slew rates.

10. Input referred, RL = 100 kW connected to V+/2. Each amp excited in turn with 1 kHz to produce VO = 3 VPP. (For Supply Voltages < 3 V,

VO = V+).

Similar Part No. - LMV982MUTAG

Manufacturer	Part #	Datasheet	Description
ON Semiconductor	LMV982MUTAG	445Kb / 21P	Single and Dual Low Voltage, Rail-to-Rail Input and Output, Operational Amplifiers with Shutdown February, 2010 ??Rev. 5

More results

Similar Description - LMV982MUTAG

Manufacturer	Part #	Datasheet	Description
ON Semiconductor	LMV931	432Kb / 20P	Single and Dual Low Voltage, Rail-to-Rail Input and Output, Operational Amplifiers April, 2010 ??Rev. 6
Diodes Incorporated	APX321	670Kb / 18P	LOW VOLTAGE, RAIL-TO-RAIL INPUT AND OUTPUT APX324 Rev. 13
National Semiconductor ...	LMC6681	750Kb / 24P	Low Voltage, Rail-To-Rail Input and Output CMOS
ON Semiconductor	LMV981	445Kb / 21P	Single and Dual Low Voltage, Rail-to-Rail Input and Output, Operational Amplifiers with Shutdown February, 2010 ??Rev. 5
Linear Technology	LT6202	1Mb / 28P	Single/Dual/Quad 100MHz, Rail-to-Rail Input and Output
	LT6204	1Mb / 28P	Single/Dual/Quad 100MHz, Rail-to-Rail Input and Output
	LT6203	1Mb / 28P	Single/Dual/Quad 100MHz, Rail-to-Rail Input and Output
ON Semiconductor	LMV931	366Kb / 18P	Single and Dual LowVoltage, Rail-to-Rail Input and Output,Operational Amplifiers August, 2012 ??Rev. 9
STMicroelectronics	OA1NP	864Kb / 31P	Rail-to-rail input and output March 2014 Rev 2
Microchip Technology	MCP6N16	7Mb / 58P	Rail-to-Rail Input and Output 03/25/14

More results

LMV982MUTAG Datasheet(PDF) 8 Page - ON Semiconductor

LMV982MUTAG Datasheet(HTML) 8 Page - ON Semiconductor

Similar Part No. - LMV982MUTAG

Similar Description - LMV982MUTAG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Datasheet Download

Link URL