Inrush Current

Inrush is limited by internal thermistor. The inrush at 240 Vac, averaged over the

first ac half-cycle under cold start conditions will not exceed 37A.

EMI/EMC Compliance

All models include built-in EMI filtering to meet the following emissions

requirements:

Ac Input

90-264 Vac, 47-63 Hz single phase.

Input Current

Maximum input current at minimum output voltage and output overload

will be less than 1.7 A. Meets input current harmonic requirements of

IEC1000-3-2.

Output Power

Normal continuous output power is 65 W, 75 W peak for 60 s. The 3.3 Vdc unit

is 36.3 W and the 5 Vdc unit is 55 W continuous.

Hold-Up Time

20 ms from loss of ac input at 65 W load, from 120 Vac input.

Overload Protection

Fully protected against short circuit and output overload. Short circuit protec-

tion is cycling type power limit.

Output Noise

0.5% rms, 1% pk-pk, 20 MHz bandwidth, differential mode. Measured with

scope probe directly across output terminals of the power supply with load

terminated with 0.1 μF capacitor.

Transient Response

Main output: 500 μs typical response time for return to within 0.5% of final

value for a 50% load step within the regulation limits of minimum and maxi-

mum load, ∆i/∆t<0.2 A/μs. Maximum voltage deviation is 3.5%. Startup/shut-

down overshoot less than 3%.

Voltage Adjustment

Adjustable potentiometer capable of ±5% change from nominal setting.

Efficiency

82 to 94% minimum at full rated load, nominal input voltage, depending on

model.

Minimum Load

No minimum load required.

GLC65 Commercial/GLM65 Medical

65 Watt Single Output Global Performance Switchers

• 4.1 W/in3

• Compact (3.0” x 5.0” x 1.06”)

• Ultra-high efficiency (up to 94%) using patented

technology

• Meets harmonic requirements of IEC1000-3-2, Class A

• Conducted EMI exceeds FCC Class B and CISPR 22

Class B (Commercial models) and CISPR 11 Class B

(Medical models)

• 2-year warranty

• Exempt from line harmonics standard EN61000-3-2

• Commercial Approved to UL1950, IEC950, EN60950,

CSA22.2 No. 950

• Medical Approved to UL2601, EN60601, CSA22.2

No. 601.1

• Multiple output versions also available

• RoHS models available (G suffix)

GLOBAL PERFORMANCE SWITCHERS

FEATURES:

SPECIFICATIONS

•

marked to LVD

EMI SPECIFICATIONS

COMPLIANCE LEVEL

Conducted Emissions GLC65

Conducted Emissions GLM65

Static Discharge

RF Field Susceptibility

Fast Transients/Bursts

Surge Susceptibility

EN55022 Class B; FCC Class B

EN55011 Class B: FCC Class B

EN61000-4-2, 6 kV contact, 8 kV air

EN61000-4-3, 3 V/meter

EN61000-4-4, 2 kV, 5 kHz

EN61000-4-5, 1 kV diff., 2 kV com.

Commercial Leakage Current

Under normal conditions, leakage current is 425 μA with 132 Vac @ 60 Hz input.

Commercial Safety

All GLC models are approved to UL1950, CSA22.2 No. 950, IEC950 and EN60950.

Medical Leakage Current

The maximum leakage current under single-fault conditions (254 Vac @ 50 Hz) is

120 μA. Under normal conditions, leakage current is 31μA with 132 Vac @ 60 Hz

input.

Medical Safety

All GLM models are approved to UL2601, CSA22.2 No. 601, IEC601-1 and EN60601.

Consult factory for approval status.

Temperature Coefficient: 0.03%°C typical on all outputs.

Remote Sense

Provided as standard feature on all models. Includes open sense protection.