Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.

Long life, High ripple, 135

℃

GPD

Series

・Guaranteed short time at 150℃

・Downsized and high-ripple current version of GPA series

・For automobile modules and other high temperature applications

・Endurance with ripple current : 2,000 to 3,000 hours at 125℃ to 135℃

・Solvent resistant type (see PRECAUTIONS AND GUIDELINES)

・RoHS Compliant

・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.

◆SPECIFICATIONS

Items

Characteristics

Category

Temperature Range

-40 to +135

℃

Rated Voltage Range

Capacitance Tolerance

±20% (M)

(at 20

℃, 120Hz)

Leakage Current

I=0.03CV or 4µA, whichever is greater.

Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)

(at 20

℃, 1 minute)

Dissipation Factor

(tanδ)

25V

35V

50V

63V

80V 100V

tan

δ (Max.)

0.14 0.12 0.10 0.10 0.08 0.08

When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.

(at 20

℃, 120Hz)

Low Temperature

Characteristics

(Max. Impedance Ratio)

25V

35V

50V

63V

80V 100V

Z(-25

℃)/Z(+20℃)

2

2

2

2

2

2

Z(-40

℃)/Z(+20℃)

4

4

4

4

4

4

(at 120Hz)

Endurance 1

The following specifications shall be satisfied when the capacitors are restored to 20

℃ after subjected to DC voltage with the rated

ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125

℃ or 135℃.

Time

125

℃　3,000hours

135

：2,000hours

Capacitance change

≦±30% of the initial value

D.F. (tan

δ)

≦300% of the initial specified value

Leakage current

≦The initial specified value

Endurance 2

The following specifications shall be satisfied when the capacitors are restored to 20

℃ after the test condition that the rated voltage is

applied for 100 hours at 150

℃ and DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage)

for the specified period of time at 125

℃ or 135℃.

Time

125

℃　2,500hours

135

：1,500hours

Capacitance change

≦±30% of the initial value

D.F. (tan

δ)

≦300% of the initial specified value

Leakage current

≦The initial specified value

Shelf Life

The following specifications shall be satisfied when the capacitors are restored to 20

℃ after exposing them for 1,000 hours at 125℃without

voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.

Capacitance change

≦±30% of the initial value

D.F. (tan

δ)

≦300% of the initial specified value

Leakage current

≦The initial specified value

◆DIMENSIONS [mm]

L'

Vent

Coated Case

15min.

4min.

φD

φd

F

φD'

L'

12.5

　　14.5　　16 　　18

0.6

　　0.8 　　0.8

0.8

5.0

7.5

7.5

7.5

φD+0.5max.

L+1.5max.

Gas escape end seal

Terminal Code : E

●

◆PART NUMBERING SYSTEM

Please refer to "Product code guide (radial lead type)"

Supplement code

Size code

Capacitance tolerance code

Capacitance code (ex. 470

µF:471, 1,000µF:102)

Lead forming·taping code

Terminal code

Voltage code (ex. 25V:250, 50V:500)

Series code

Category

M

8

1

15 16 17

14

18

11 12 13

5

6

7

2

3

4

9

10

Downsized

Higher ripple current

GPD

GPA

P207

219

CAT. No. E1001Q

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS