MKW50 SERIES

DC/DC CONVERTER 50W, Highest Power Density

Notes

1

Specifications typical at Ta=+25

℃, resistive load, nominal input voltage and rated output current unless otherwise noted.

2

Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%.

3

Ripple & Noise measurement bandwidth is 0-20MHz, measured with a 1μF MLCC and a 10μF Tantalum Capatitor.

4

All DC/DC converters should be externally fused at the front end for protection.

5

Other input and output voltage may be available, please contact factory.

6

To order the converter with heatsink, please add a suffix -HS (e.g. MKW50-12S05-HS) to order code.

7

The MKW50 series can meet EN55022 Class A with parallel an external capacitor to the input pins. (12Vin: 22μF/25V 1210 MLCC, 24Vin: 3.3μF/50V 1210 MLCC,

48Vin: 2.2μF/100V 1210 MLCC.

8

The MKW50 series can meet EN61000-4-4 & EN61000-4-5 by adding a capacitor across the input pins.Suggested capacitor: CHEMI-CON KY 330μF/100V.

9

Do not exceed maximum power specification when adjusting output voltage.

10

That “natural convection” is about 20LFM but is not equal to still air (0 LFM).

11

Specifications are subject to change without notice.

Tota

Total Power International, Inc.

Total Power In

Total Power International, Inc

Toll Free: 877-646-0900

www.total-power.com