TPS35A

SWITCHING MODE 25W/35W ADAPTERS

MODEL

OUTPUT

VOLTAGE

ADJUSTMENT

RANGE

MAXIMUM OUTPUT

CURRENT

PEAK OUTPUT

CURRENT(NOTE1)

MINIMUM OUTPUT

CURRENT

TOTAL

REGULATION(NOTE3)

RIPPLE & NOISE

%P-P(NOTE2)

PEAK OUTPUT

POWER(NOTE1)

TRIPLE OUTPUT MODEL SELECTI`ON CHART

+3.3V

Fixed

3A

3.9A

0.3A

±

5%

±

1.5%

+ 5V

Fixed

2.8A

3.9A

0.28A

±

5%

±

1%

PPS35A-39Y

+12V

Fixed

0.5A

0.65A

0.05A

±

10%

±

1%

35W Typical

NOTES: 1) Peak loads for lasting <30 seconds with a maximum 10% duty cycle are acceptable. Please contact us if need special peak load.

2) Maximum peak to peak noise expressed as a percentage of output voltage, 20MHz bandwidth, 0.1μF and 47μF Cap. on outputs.

3) Loading test conditions are set for all outputs at minimum, middle and maximum of loads. Special cross loading requirement is welcomed.

4) Detailed engineering specification of each model is available for inquiry.

5) Special output voltage/current inquiry is welcomed.

6) Specifications subject to change without notice.

7) 25% derated if 24 VDC input version; 50% derated if 12 VDC input version.

8) Above data is measured at the output plug/connector of 1M long cable. Please contact us if need special cable and connector.

9) For single 3.3V output, the output is 19.8W maximum; For single 5V output, the output is 30W maximum.

For multiple outputs with 3.3V as V1, the output is 27W maximum; For multiple outputs with 5V as V1, the output 30W maximum.

TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395

Email: sales@total-power.com http://www.total-power.com

-3-

TOTAL POWER