1xEV-DO default packet application

Default packet application

Protocol stack

1xEV-DO Release 0 and Release A

Default packet application opera-

tion

Allows the test set to emulate a complete data network by

providing transparent connectivity to a 1xEV-DO AT. Supports

simple IP and mobile IP connections. Requires that the test be

connected to an external server via the rear panel LAN con-

nector

R-DRC channel mode

Test set decodes the R-DRC and changes the forward traffic

channel to match the requested rate

DRC length

User-settable to 2, 4, or 8 slots

Early termination

Supported in the forward link

AT directed packets

Test set automatically directs the forward traffic channel to

another MAC address that is not in use if there are no packets

received via the LAN to send to the AT under test

Data rate

Supports all forward rates from 38.4 kbps to 3.1 Mbps. Con-

nected AT dynamically selects the actual data

rate used. Supports all reverse rates from 9.6 kbps to 1.8

Mbps. Connected AT dynamically selects the actual data rate

used

Data over signaling in the reverse

link

Supports voice data in the signaling message on the control

channel from the AT

Dormant mode

Supported

RLP control counters

Provides counters for forward and reverse reset messages,

NAK messages, and NAKKed octets

RLP data counters

Provides counters for forward and reverse new octets, retrans-

mitted octets, and packets

IP data counters

Provides counters for forward and reverse bytes and packets

Forward traffic data counters

Provides counters for the number of packets transmitted at the

following configurations as commanded by the AT:

38.4 kbps

76.8 kbps

153.6 kbps

307.2 kbps

307.2 kbps

614.4 kbps

614.4 kbps

921.6 kbps

1228.8 kbps

1228.8 kbps

1843.2 kbps

2457.6 kbps

16 slots, QPSK

8 slots, QPSK

4 slots, QPSK

2 slots, QPSK

4 slots, QPSK

1 slot, QPSK

2 slots, QPSK

2 slots, 8PSK

1 slot, QPSK

2 slot, 16QAM

1 slot, 8PSK

1 slot, 16QAM

(DRC = 0x1)

(DRC = 0x2)

(DRC = 0x3)

(DRC = 0x4)

(DRC = 0x5)

(DRC = 0x6)

(DRC = 0x7)

(DRC = 0x8)

(DRC = 0x9)

(DRC = 0xA)

(DRC = 0xB)

(DRC = 0xC)

Total number of packets directed to the AT

Total number not directed to the AT

Reverse traffic data counters

Provides counters for the number of packets transmitted at the

following rates:

9.6 kbps

19.2 kbps

38.4 kbps

78.6 kbps

153.6 kbps

08 | Keysight | E6706G 1xEV-DO Lab Application - Technical Overview