Electronic Components Datasheet Search |
|
MB95F818KPMC-G-UNE2 Datasheet(PDF) 4 Page - Cypress Semiconductor |
|
MB95F818KPMC-G-UNE2 Datasheet(HTML) 4 Page - Cypress Semiconductor |
4 / 121 page MB95810K Series Document Number: 002-04694 Rev. *A Page 4 of 121 On-chip debug • 1-wire serial control • It supports serial writing (asynchronous mode). UART/SIO 1 channel • Data transfer with UART/SIO is enabled. • It has a full duplex double buffer, variable data length (5/6/7/8 bits), an internal baud rate generator and an error detection function. • It uses the NRZ type transfer format. • LSB-first data transfer and MSB-first data transfer are available to use. • Both clock asynchronous (UART) serial data transfer and clock synchronous (SIO) serial data transfer are enabled. I2C bus interface 1 channel • Master/slave transmission and receiving • It has the following functions: bus error function, arbitration function, transmission direction detection function, wake-up function, and functions of generating and detecting repeated START conditions. 8/16-bit PPG 2 channels • Each channel can be used as an “8-bit timer 2 channels” or a “16-bit timer 1 channel”. • The counter operating clock can be selected from eight clock sources. 16-bit PPG timer 2 channels • PWM mode and one-shot mode are available to use. • The counter operating clock can be selected from eight clock sources. • It supports external trigger start. 16-bit reload timer 1 channel • Two clock modes and two counter operating modes are available to use. • It can output square wave. • Count clock: it can be selected from internal clocks (seven types) and external clocks. • Two counter operating modes: reload mode and one-shot mode Watch counter • Count clock: it can be selected from eight clock sources from the watch prescaler. • The counter value can be selected from 0 to 63. (The watch counter can count for one minute when the clock source of one second is selected and 60 is selected as the counter value.) Watch prescaler Eight different time intervals can be selected. Comparator 2 channels The reference voltage of each channel can be selected between the BGR voltage and the comparator pin. Flash memory • It supports automatic programming (Embedded Algorithm), and program/erase/erase-suspend/erase- resume commands. • It has a flag indicating the completion of the operation of Embedded Algorithm. • Flash security feature for protecting the content of the Flash memory Part number Parameter MB95F814K MB95F816K MB95F818K Number of program/erase cycles 1000 10000 100000 Data retention time 20 years 10 years 5 years |
Similar Part No. - MB95F818KPMC-G-UNE2 |
|
Similar Description - MB95F818KPMC-G-UNE2 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |