 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
408-9140 Datasheet(PDF) 2 Page - TE Connectivity Ltd |
|
||||||||||||||||||||||||||||||
408-9140 Datasheet(HTML) 2 Page - TE Connectivity Ltd |
|
|
2 / 3 page  408- 9140 Rev D 2 of 3 Figure 2 Insert Center Contact into the Partially Closed Crimping Dies Ferrule (Ref) Center Contact Slipped Over the Center Conductor Flange on End of Center that Butts Against the Die Flange on the End of the Contact Crimping Die Figure 3 3.2. Ferrule 1. Insert the crimped center contact into the connector body until the cable dielectric butts against the dielectric inside the connector body. The flared braid will then fit around the support sleeve of the connector body. 2. Slide the ferrule forward over the braid until the ferrule butts against the shoulder on the connector body. 3. Place the ferrule on the approriate anvil of the die assembly so that the shoulder on the connector body butts against the die. See Figure 4. 4. Holding the assembly in place, close the tool handles until the ratchet releases. 5. Remove the crimped assembly. 4. INSPECTION 4.1. Visual Inspection Inspection of the crimping dies should be made on a regular basis to ensure that they have not become worn or damaged. Inspect the crimp sections for flattened, chipped, worn, or broken areas. If damage or abnormal wear is evident, the dies must be replaced. Refer to Section 5, PARTS REPLACEMENT. 4.2. Measuring Die Opening The die assembly will perform correctly as long as: a. the product specified is correct for the application, b. the specific die assembly is used, c. the die assembly has been measured to ensure that the openings are correct, and d. the tool has been adjusted correctly. Figure 5 provides information on die opening sizes. Figure 4 Crimping Ferrule Shoulder On Connector Body Butts Against Die Ferrule On Anvil Of Crimping Die Typical RF Connector (Ref) Crimping Die (Ref) |
Similar Part No. - 408-9140 |
|
Similar Description - 408-9140 |
|
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.NET |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
