408-2710

4 of 5

Rev G

Figure 5

5. REPLACEMENT AND REPAIR

Replacement parts are listed in Figure 7. Parts other

than those listed in Figure 7 should be replaced by TE

to ensure quality and reliability of the tool. Order

replacement parts through your TE representative, or

call 1-800-526-5142, or send a facsimile of your

purchase order to 1-717-986-7605, or write to:

CUSTOMER SERVICE (038-035)



TYCO ELECTRONICS CORPORATION



PO BOX 3608



HARRISBURG PA 17105-3608

For additional information regarding the use of a plug

gage, refer to instruction sheet 408-7424.

For customer repair service, contact a TE

representative at 1-800-526-5136.

Figure 6

6. REVISION SUMMARY

Since the last revision of this document, the following

changes were made:

CRIMPING

DIE NUMBER

GAGE DIMENSION

GO (DIA)

NO-GO (DIA)

68361-1

7.544 - 7.551

[.2970 - .2973]

7.795 - 7.798

[.3069 - .3070]

68253-1

8.509 - 8.517

[.3350 - .3353]

8.760 - 8.763

[.3449 - .3450]

59867-1

9.576 - 9.583

[.3770 - .3773]

9.827 - 9.830

[.3869 - .3870]

68304-1

10.490 - 10.498

[.4130 - .4133]

10.742 - 10.744

[.4229 - .4230]

Suggested Plug Gage Design

GO Dia.

NO-GO Dia.

Wire Barrel

Crimping Chamber

GO Element

NO-GO Element

Gage Dim.

42.27 [1.664]

Dies Positioned At

“Gage Dimension”