IO-Link-Compliant HV Line

Driver (Single Channel)

ZIOL2211

Feature Sheet

© 2016 Integrated Device Technology, Inc.

2

April 20, 2016

Typical Applications

ZIOL2211 Block Diagram

In field applications, the ZIOL2211

acts as a universal cable driver.

The ZIOL2211 can support IO-Link

communications as a physical-layer

transceiver

(PHY)

for

IO-Link

devices.

Common applications:

• 24V line driver/level shifter

• IO-Link-compliant devices

See the ZIOL2xxx IC Family Data Sheet

for detailed technical information.

Ordering Information

Product Sales Code

Description

Package

ZIOL2211BI1R

Single Channel IO-Link compliant HV Line Driver, 4x4mm QFN24

13” reel

ZIOL2211BI1W

Single Channel IO-Link compliant HV Line Driver, 4x4mm QFN24

7” reel

IO-Link Lab Kit V2.0

#3600100858

ZIOL2401 Lab Kit for detailed laboratory evaluation: configurable IC/Communication/Controller

Board, USB cable; software is available for download from http://www.IDT.com with a free

customer login (see data sheet for details).

ZIOL2401 Starter-Kit

#3600100369

ZIOL2401 Starter Kit for product demonstration: USB stick, extension board, downloadable

software

Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138

www.IDT.com

Sales

1-800-345-7015 or 408-284-8200

Fax: 408-284-2775

www.IDT.com/go/sales

Tech Support

www.IDT.com/go/support

DISCLAIMER Integrated Device Technology, Inc. (IDT) reserves the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance

specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The

information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an

implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property

rights of IDT or any third parties.

IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be

reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the

property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated

Device Technology, Inc. All rights reserved.

Application Side

Low Voltage (LV) Signals

Power

Supply

Single channel

transceiver

COM

Control

Application

Circuit

RX/TX

Configuration

Diagnosis

Cable

Power

GND

Ch 0

Cable Side

High Voltage (HV)

Signals

ZIOL2211

Actuator,

Sensor,

or

Interface

to Host

System