114- 10011

Rev C

11

of 11

6. VISUAL AID

Figure 11 shows a typical application of an Audio/Microphone Connector. This illustration should be used by

production personnel to ensure a correctly applied product. Applications which DO NOT appear correct should

be inspected using the information in the preceding pages of this specification and in the instructional material

shipped with the product or tooling.

FIGURE 11. VISUAL AID

NO CONDUCTOR

WIRES SHOWING IN

WIRE BARREL SEAM

WIRE CONDUCTORS AND

INSULATION BOTH VISIBLE

IN THIS AREA

CONDUCTOR ENDS

MUST BE VISIBLE

MATING END MUST

NOT BE DAMAGED

BELLMOUTHS MUST

BE VISIBLE

MAKE SURE RECEPTACLE

HOUSING IS SECURE ON PANEL

PLUG AND RECEPTACLE

CONNECTOR MUST NOT

BE DAMAGED

PULL LIGHTLY ON

WIRE TO MAKE

SURE CONTACTS

ARE SEATED

MAKE SURE BOTH CONNECTORS

CONTAIN SAME NUMBER OF

POSITIONS