Electronic Components Datasheet Search
  English  ▼
ALLDATASHEET.NET

X  

6-1393817-5 Datasheet(PDF) 4 Page - TE Connectivity Ltd

Part # 6-1393817-5
Description  Highly reliable multi purpose relay
Download  5 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  TEC [TE Connectivity Ltd]
Direct Link  http://www.te.com/usa-en/home.html
Logo TEC - TE Connectivity Ltd

6-1393817-5 Datasheet(HTML) 4 Page - TE Connectivity Ltd

  6-1393817-5 Datasheet HTML 1Page - TE Connectivity Ltd 6-1393817-5 Datasheet HTML 2Page - TE Connectivity Ltd 6-1393817-5 Datasheet HTML 3Page - TE Connectivity Ltd 6-1393817-5 Datasheet HTML 4Page - TE Connectivity Ltd 6-1393817-5 Datasheet HTML 5Page - TE Connectivity Ltd  
Zoom Inzoom in Zoom Outzoom out
 4 / 5 page
background image
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
4
AXICOM
Signal Relays
Cradle P Relay V23003 (Continued)
108-98012 Rev. C
All specifications subject to change. Consult Tyco Electronics for latest specifications.
9 of 14
Telecom-, Signal and RF Relays
Cradle Relay P V23003
AXICOM
Instructions for Impulse Operation
Cradle relay P is primarily intended for impulse operation. The maximum voltage stated in the table (page 2)
can be increased for impulse operation as follows:
UII Impuls =
UII tamb . q
UII tamb =
Maximum continuous voltage at ambient temperature t amb
q
=
Factor
The impulse voltage must not exceed 80% of the test voltage (winding/frame or winding/winding) or 3.3 times at ambient
temperature = 20 °C and 2.3 times at ambient temperature < 20 °C the value of the maximum voltage listed
in the table (page 2).
Ift ED 3 s then q
=
Ift ED
=
Pulse width
t2
=
Cycle time
If tED
=
> 3 s the value of q must be obtained from the nomograph (cradle relay N datasheet page 103).
Examples of various periodic pulse trains (energizing side)
1. Periodic recurrence of one energizing pulse
tED
=
tI + tII
tI
=
Pulse width of the positive pulse at the start of the winding
tI + tII =
Pulse width of the negative pulse at the start of the winding
tI + tII =
Pulse widths within one cycle
2. Periodic recurrence of two unequal energizing pulses
Instructions for Impulse Operation
Cradle relay P is primarily intended for impulse operation. The maximum
voltage stated in the coil table can be increased for impulse operation as
follows:
UII Impuls
UII tambxq
UII tamb
Maximum continuous voltage at ambient temperature tamb
q
Factor
The impulse voltage must not exceed 80% of the test voltage (winding/
frame or winding/winding) or 3.3 times at ambient temperature 20°C and
2.3 times at ambient temperature <20°C the value of the maximum voltage
listed in the coil table.
IftED ≤ 3s then q=
; IftED = Pulse width, t2 = Cycle time.
If tED > 3s the value of q must be obtained from the nomograph.
Examples of various periodic pulse trains (energizing side)
1. Periodic recurrence of one energizing pulse
tED = tI + tII
tl = Pulse width of the positive pulse at the start of the winding
tII = Pulse width of the negative pulsee at the start of the winding
tI + tII = Pulse widths within one cycle
2. Periodic recurrence of two unequal energizing pulses
108-98012 Rev. C
All specifications subject to change. Consult Tyco Electronics for latest specifications.
9 of 14
Telecom-, Signal and RF Relays
Cradle Relay P V23003
AXICOM
Instructions for Impulse Operation
Cradle relay P is primarily intended for impulse operation. The maximum voltage stated in the table (page 2)
can be increased for impulse operation as follows:
UII Impuls =
UII tamb . q
UII tamb =
Maximum continuous voltage at ambient temperature t amb
q
=
Factor
The impulse voltage must not exceed 80% of the test voltage (winding/frame or winding/winding) or 3.3 times at ambient
temperature = 20 °C and 2.3 times at ambient temperature < 20 °C the value of the maximum voltage listed
in the table (page 2).
Ift ED 3 s then q
=
Ift ED
=
Pulse width
t2
=
Cycle time
If tED
=
> 3 s the value of q must be obtained from the nomograph (cradle relay N datasheet page 103).
Examples of various periodic pulse trains (energizing side)
1. Periodic recurrence of one energizing pulse
tED
=
tI + tII
tI
=
Pulse width of the positive pulse at the start of the winding
tI + tII =
Pulse width of the negative pulse at the start of the winding
tI + tII =
Pulse widths within one cycle
2. Periodic recurrence of two unequal energizing pulses
Product code structure
Typical product code
V23003
-B0
037
-F1
04
Type
V23003
Cradle P Relay, dust protected
Size
A0
Size I, dust-protected
B0
Size II, dust-protected
Coils
Coil code: please refer to coil versions table
Contact style
B1
Single contacts
B6
Single contacts
F1
Single contacts
C1
Bifurcated contacts
C4
Bifurcated contacts
Contact arrangement
04
2 form C, 2 CO
05
2 form A, 1 NO
06
1 form A+ 1 form B, 1 NO+ 1 NC
10
4 form C, 4 CO
Other types on request


Similar Part No. - 6-1393817-5

ManufacturerPart #DatasheetDescription
logo
TE Connectivity Ltd
6-1393817-5 TEC-6-1393817-5 Datasheet
1Mb / 5P
   Great variety of contact arrangements and materials to meet specific applications
More results

Similar Description - 6-1393817-5

ManufacturerPart #DatasheetDescription
logo
Omron Electronics LLC
G2A-434A-NAC115 OMRON-G2A-434A-NAC115 Datasheet
678Kb / 10P
   Highly Reliable, 4-pole Miniature Relay Ideal for Sequence Control
G2A OMRON-G2A Datasheet
678Kb / 10P
   Highly Reliable, 4-pole Miniature Relay Ideal for Sequence Control
logo
Amphenol Corporation
P562 AMPHENOL-P562 Datasheet
69Kb / 2P
   Highly reliable, silicon pressure sensor
logo
Topstek Inc.
TMC-100A TOPSTEK-TMC-100A Datasheet
129Kb / 2P
   Highly reliable Hall Effect device
TGD-3A TOPSTEK-TGD-3A Datasheet
99Kb / 2P
   Highly reliable Hall Effect device
THDD-5A TOPSTEK-THDD-5A Datasheet
92Kb / 2P
   Highly reliable Hall Effect device
THT-6A TOPSTEK-THT-6A Datasheet
90Kb / 2P
   Highly reliable Hall Effect device
TJC-25A TOPSTEK-TJC-25A Datasheet
162Kb / 2P
   Highly reliable Hall Effect device
THP-5A TOPSTEK-THP-5A Datasheet
102Kb / 2P
   Highly reliable Hall Effect device
logo
Panasonic Semiconductor
DR-L2-24V PANASONIC-DR-L2-24V Datasheet
458Kb / 3P
   HIGHLY RELIABLE MINIATURE DIP RELAYS
More results


Html Pages

1 2 3 4 5


Datasheet Download

Go To PDF Page


Link URL




Privacy Policy
ALLDATASHEET.NET
Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com