Electronic Components Datasheet Search |
|
2119980-1 Datasheet(PDF) 4 Page - Tyco Electronics |
|
2119980-1 Datasheet(HTML) 4 Page - Tyco Electronics |
4 / 6 page 408-10413 4 of 6 Rev A Figure 6 4. Place the notched ribbon cable in the connector with the notch being aligned with the connector post. See Figure 5B. 5. Place the base half of the connector in the die nest. See Figure 5C. 6. Hold the ribbon cable steady while squeezing the hand tool handles. 7. Release the handles to open the hand tool. 8. Remove the crimped connector from the die set. 5.3. Crimping the Straight Connector (Figure 6) 1. Install the multi-nest die set (blue dot) into the hand tool as specified in Section 3. 2. Place the connector in the die set nest as shown in Figure 6. The TE logo should be facing the moving jaw of the hand tool. 3. Place the prepared ribbon cable fully into the connector. 4. Squeeze the hand tool handles while keeping the ribbon cable fully inserted into the connector. 5. Release the handles to open the hand tool. 6. Remove the crimped connector from the die set. 5.4. Crimping the Terminator (Figure 7) 1. Install the multi-nest die set (blue dot) into the hand tool as specified in Section 3. Figure 7 NOTE i |
Similar Part No. - 2119980-1 |
|
Similar Description - 2119980-1 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |