228635-1 datasheet(6/12 Pages) TEC

Part #	228635-1

Description	Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools

Download	12 Pages

Scroll/Zoom	100%

Manufacturer	TEC [TE Connectivity Ltd]

Direct Link	http://www.te.com/usa-en/home.html

Logo

6 / 12 page

408-6788

6 of 12

Rev L

Figure 7

2. Place the connector and cable inside the tool

locator, making sure that:

— the center conductor of center contact enters the

locator hole

— the connector is seated squarely on the locator

— if crimping a panel jack to the cable, the sides of

the panel jack should align with the tool jaws as

shown in Figure 9

3. Support the cable-and-connector assembly, and

squeeze the tool handles to complete the crimp as

shown in Figure 9.

6.2. For Connectors with Retractable Collars

Connectors with sliding coupling nuts (shown in Figure

10) require Special Die Set 312962-1 which is not

included in the kit and MUST be ordered separately.

Proceed as follows:

1. Slide the nut then the connector body, flange end

first, onto the cable.

2. Place the connector body and cable inside the

tool locator, making sure that the center conductor

enters the locator hole, and that the coupling nut is

positioned above the tool head.

Figure 8

Tool Setup

Die-Holding Hex Head

Screws (Captive)

Detail A

Detail B

Locator Locking

Screw (Ref)

Chamfer

Locator

(Typ)

Slip Cable in Locator

Between Dies. Tighten

Screws While Cable Holds

Dies in Proper Alignment

Center Conductor

of Connector Must

Enter Hole in

Locator

Crimping Connectors with Fixed Collars

(Except Right-Angle Connectors)

Connector with

Fixed Collar

Dies will Close Against

Cable and Connector to

Complete Termination

Similar Part No. - 228635-1

Manufacturer	Part #	Datasheet	Description
List of Unclassifed Man...	2286	68Kb / 1P	WASHERS
TE Connectivity Ltd	228604-1	213Kb / 2P	Extraction Tools
	228618-1	213Kb / 2P	Extraction Tools
	2286546-1	5Mb / 7P	CONNECTIVITY SOLUTIONS FOR INFOTAINMENT APPLICATIONS
	2286547-1	5Mb / 7P	CONNECTIVITY SOLUTIONS FOR INFOTAINMENT APPLICATIONS

More results

Similar Description - 228635-1

Manufacturer	Part #	Datasheet	Description
Tyco Electronics	408-8698	623Kb / 3P	Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
Tyco Electronics	408-8695	988Kb / 3P	Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools
TE Connectivity Ltd	408-32084	650Kb / 5P	Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools
	408-6790	306Kb / 3P	Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
	408-1535	640Kb / 7P	Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools
	408-1412	741Kb / 7P	Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools
	408-9786	427Kb / 6P	Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
Tyco Electronics	408-1662	1Mb / 8P	Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
TE Connectivity Ltd	408-4087	285Kb / 5P	Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
	408-8691	769Kb / 7P	Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools
	408-8739	836Kb / 6P	Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools

More results

228635-1 Datasheet(PDF) 6 Page - TE Connectivity Ltd

228635-1 Datasheet(HTML) 6 Page - TE Connectivity Ltd

Similar Part No. - 228635-1

Similar Description - 228635-1

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Datasheet Download

Link URL