TC558128BJ datasheet(6/17 Pages) ATMEL

Part #	TC558128BJ

Description	Supports the ATmega2560, ATmega1280 and ATmega640

Download	17 Pages

Scroll/Zoom	100%

Manufacturer	ATMEL [ATMEL Corporation]

Direct Link	http://www.atmel.com

Logo

6 / 17 page

6

STK503.

1.

Make sure the STK500 power is switched off.

2.

Make sure that the STK503 is properly mounted on STK500. (See

Mounting the STK503 for details.)

3.

Place the AVR in the ZIF socket. Pay attention to the pin 1 marking on the

device and on the ZIF socket and PCB.

Figure 3-3: Placing the AVR in the ZIF socket.

Similar Part No. - TC558128BJ

Manufacturer	Part #	Datasheet	Description
ATMEL Corporation	STK505	158Kb / 11P	Supports the ATtiny24 and ATtiny26
Freescale Semiconductor...	KL16P64M48SF4	1Mb / 55P	Supports the following MKL16Z256VLH4, MKL16Z256VMP4
Analog Devices	EVAL-ADPD105Z-GEN	1Mb / 26P	Supports the detection of UART
ATMEL Corporation	STK504	568Kb / 21P	Supports the ATmega3290 and ATmega6490 with built-in LCD controller
NXP Semiconductors	K70P256M120SF3	1Mb / 97P	K70 Sub-Family Supports the following Rev. 7, 02/2018
	K10P64M50SF0	988Kb / 62P	K10 Sub-Family Supports the following Rev. 5 10/2023
	K61P256M150SF3	1Mb / 94P	K61 Sub-Family Supports the following Rev. 7, 02/2018
	S32M2XX	2Mb / 135P	Supports S32M24x and S32M27x Rev. 3 - 10/2023
	MC56F80XXX	1Mb / 71P	Supports MC56F807xx and MC56F806xx Rev. 2.1, 02/2023
Dialog Semiconductor	DA14AVDDECT	1Mb / 25P	The module is based on Dialogs DA14495 chip that supports DQPSK and D8PSK besides the