Electronic Components Datasheet Search |
|
X2572S-L Datasheet(PDF) 3 Page - Amphenol Corporation |
|
X2572S-L Datasheet(HTML) 3 Page - Amphenol Corporation |
3 / 8 page 3 Software Features Historical graphing Once a study has been started, user can connect his PC anytime to the base station and retrieve all the data from the base station on the real time graph to view the data that has been logged by the loggers to that point. This will enable viewing historical data without having to stop the study at the base station. RF Map Users can graphically view the RF Signal strength of the loggers and their connections to other loggers and basestation for stronger RF networks. A background image can also be set for the RF map to position the loggersonarealfloorplan.Theuserscanusethisas back up documentation for looking at the position of the loggers at a later time. Real time graphing calculations Realtimegraphingprovidesmin/max/avgcalculations for the RH and Temp parameters of all the loggers being plotted in the real time graph. Alarming User can set low and high alarms on the real time graph to see if any loggers have crossed the limits. The limits can also be labeled by the user. Auto Calibration/Verification RFValProbeSystemenablesautocalibration/ verification for the users when using the RF loggers, Kaye IRTD, Kaye Temperature baths. This enables the user to select the set points and let the software run thecalibration/verificationincludingloadingofoffsets into the loggers automatically. The software will control the Kaye drywells and read the reference temperature data from a connected Kaye IRTD permitting full automatic calibration with the Kaye calibration products. Providing that the users configure the communications port , access to automatic calibration will be permitted. Calibration is still permitted if either drywells or IRTD is not present, in which case either semi-automatic or manual mode calibration is used. Independent Report Wizard Along with the RF ValProbe software, there is an additional software program called the “Kaye Report Wizard”. This report wizard permits the user to launch the “Create Reports” section independently of the Kaye product installed on the user’s PC. The “Create Reports” button of the standard software will continue to operate as in previous versions. The user can decide install the Report Wizard in a separate folder and use it to report on all 3 Kaye products: Validator, Valprobe or RF Valprobe. Interference The SmartMesh® technology combines frequency hopping with TDMA (Time Division Multiple Access). In addition the mesh protocol permits the system to learn about the RF environment and dynamically adjust the network parameters to best fit the current situation. The network provides an accurate time reference for the whole network, ensuring all loggers and the base station are time synchronized correctly. Each data sample is timestamped with this network time. Coexistence with Other RF Systems The RF ValProbe complies with the IEEE 802.15.4, the preeminent RF sensor network standard. Features like frequency hopping, listen-before-you-talk and channel blacklisting prevents other RF networks being affected by the RF ValProbe. |
Similar Part No. - X2572S-L |
|
Similar Description - X2572S-L |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |