Low-Power, High-Resolution 16-Bit

Sensor Signal Conditioner

ZSSC3036

Datasheet

© 2016 Integrated Device Technology, Inc.

2

April 20, 2016

Applications

portable navigation or emergency call

systems

ZSSC3036

Block Diagram

Sales Code

Description

Delivery Package

ZSSC3036CC1B

Die—temperature range: –40°C to +85 °C

Wafer (304µm) unsawn, tested

ZSSC3036CI1B

Die—temperature range: –40°C to +85 °C, extended qualification

Wafer (304µm) unsawn, tested

ZSSC3036CC1C

Die—temperature range: –40°C to +85°C

Dice on frame (304µm), tested

ZSSC3036CI1BH

Die—temperature range: –40°C to +110 °C, extended qualification

Wafer (304µm) unsawn, tested

ZSSC3036CI1CH

Die—temperature range: –40°C to +110 °C, extended qualification

Dice on frame (304µm), tested

ZSSC30x6-KIT

Evaluation Kit for ZSSC30x6 Product Family, including boards, cable, software, and 1 sample

Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138

www.IDT.com

Sales

1-800-345-7015 or 408-284-8200

Fax: 408-284-2775

www.IDT.com/go/sales

Tech Support

www.IDT.com/go/support

DISCLAIMER Integrated Device Technology, Inc. (IDT) reserves the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance

specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The

information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an

implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property

rights of IDT or any third parties.

IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be

reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the

property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated

Device Technology, Inc. All rights reserved.

Sensor

Bridge

AGND / CM

Generator

Bias Current

Generator

Power-ON

Reset

Temperature

Reference

Sensor

18-bit DSP Core

(Calculations,

Communication)

MTP

ROM

System

Control

Unit

Pre-

Amplifier

EOC

INP

INN

VDD

VSSB

Ring

Oscillator

Clock

Generator

SEL

SPI

I²C

TM

SCLK/SCL

MISO

MOSI/SDA

SS

VSS

Voltage

Regulator

Power Ctr.

Vreg int

A

D

16 Bit

VDDB

ZSSC3036