Electrical Characteristics(Note 2) (Continued)

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is

intended to be functional, but specific performance is not guaranteed. For guaranteed specifications, see the Electrical Characteristics.

Note 2: Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating of

Note 4: Human body model, 1.5 k

Ω in series with 100 pF. Machine Model, 0Ω in series with 200 pF

Note 5: Slew rate is the average of the rising and falling slew rates.

Note 6: Typical values represent the most likely parametric norm. Bold numbers refer to over temperature limits.

Note 7: Positive current corresponds to current flowing into the device.

Note 8: Drift determined by dividing the change in parameter distribution at temperature extremes by the total temperature change.

Note 9: +PSRR definition: [|

subtracted out.

Note 10: Gain/Phase normalized to low frequency value at 25˚C.

Note 11: Gain/Phase normalized to low frequency value at each setting.

Note 12: Gain control frequency response schematic:

20084316

Note 13: Flat Band Attenuation (Relative To Max Gain) Range Definition: Specified as the attenuation range from maximum which allows gain flatness specified

Connection Diagram

8-Pin SOIC

20084301

Top View

Ordering Information

Package

Part Number

Package Marking

Transport Media

NSC Drawing

8-Pin SOIC

LMH6504MA

LMH6504MA

95 Units/Rail

M08A

LMH6504MAX

2.5k Units Tape and Reel

8-Pin MSOP

LMH6504MM

A93A

1k Units Tape and Reel

MUA08A

LMH6504MMX

3.5k Units Tape and Reel

www.national.com

4