1 of 4

© 2015 TE Connectivity family of companies

All Rights Reserved

*Trademark

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.

TOOLING ASSISTANCE CENTER 1-800-722-1111

PRODUCT INFORMATION 1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com.

Instruction Sheet

408-32163

09 FEB 15

Rev A

EXTRACTION TOOL

ENHANCED SFP+ CAGE ASSEMBLY CONFIGURATION

2215058-1

1 X 1

2215058-2

1 X 2

2215058-3

1 X 3

2215058-4

1 X 4

2215058-5

1 X 5

2215058-6

1 X 6

Figure 1

1. INTRODUCTION

Enhanced SFP+ Extraction Tool Kits 2215058-[ ] are used to remove the printed circuit (pc) board from

Enhanced SFP+ connector and cage assemblies described in Figure 1. The cage assemblies contain press-fit

contacts. Read these instructions thoroughly before using the extraction tool kit.

NOTE

Dimensions on this sheet are in metric units [with U.S. customary units in brackets]. Figures and illustrations are for reference

only and are not drawn to scale.

2. DESCRIPTION

Each extraction tool kit consists of an extraction tool, a top push plate, base plate, and wall supports (one for

each stacked row of the cage assembly).

The base plate features a finger mounting block that holds up to six wall supports to the base plate. See

Figure 1. The top push plate is designed to be installed onto the upper tooling and the base plate is designed to

be installed onto the lower tooling of the application tool. The extraction tool has cutouts (one located on each

side) to accept the protruding part of the cage assembly. Each “finger” of a wall support fits into a port of the

cage assembly.

Enhanced Small Form-Factor

Pluggable (SFP+) Extraction Tool Kit

2215058-[ ] Cage Assemblies

Cutout (2 Plc)

Extraction Tool

Top Push Plate

Wall Supports

Finger Mounting Block

Base Plate

1 X 5 QSFP SFP+ Cage

Assembly 2284170-1

Printed Circuit

(PC) Board (Ref)