MNR04

Resistors

1/4

Chip resistor networks

MNR04 (1005

× 4 size)

!

Features

1) Extremely small and light

Area ratio is 60% smaller than that of chip 3216 (MNR14), while weight ratio has been cut 75%.

2) High-density mounting

Can be mounted even more densely than four 1005 chips (MCR01), and mounting costs are lower.

3) Can be mounted on a wide variety of devices

Squared corners make it excellent for mounting on image recognition devices.

4) Convex electrodes

Easy to check the fillet after soldering is finished.

5) ROHM resistors comply with the international standard ISO-9001.

Furthermore, changes to the design and specifications of products may occur without notice. Therefore, before

ordering or using this product, please make sure to reconfirm the specification sheet before ordering or using this

product.

!

!

!

!

Ratings

Item

Conditions

Specifications

0.063W (1 / 16W)

Rated power

Rated voltage

Operating temperature

Nominal resistance

See Table 1.

E : Voltage rating (V)

P : Power rating (W)

R : Nominal resistance (

Ω)

Limiting element voltage

−55°C~+125°C

25V

at 70

°C

Power must be derated according to the power derating curve in

Figure 1 when ambient temperature exceeds 70

°C.

The voltage rating is calculated by the following equation. If the

value obtained exceeds the limiting element voltage, the voltage

rating is equal to maximum operating voltage.

E

= P×R

0

20

40

60

80

100

Ð 55

0

70

100

125

AMBIENT TEMPERATURE (

°C)

Fig.1