Features

n

BalancedMini-TRIGARD™Series

(5mmdiameter,7.3mmlength)

n

Idealforboardlevelprotectionof

broadbandcircuits

n

Leadless,surfacemountforeconomical

assembly

n

Stablebreakdownthroughoutlife

n

Highsurgecurrentrating,lowinsertionloss

n

ULRecognized

n

RoHScompliant*versionavailable

Characteristics

2036-xx-SMPrecisionGasDischargeTubeSurgeProtector

*RoHSDirective2002/95/ECJan.27,2003includingannexandRoHSRecast2011/65/EUJune8,2011.

Specificationsaresubjecttochangewithoutnotice.

Thedevicecharacteristicsandparametersinthisdatasheetcananddovaryindifferentapplicationsandactualdeviceperformancemayvaryovertime.

Usersshouldverifyactualdeviceperformanceintheirspecificapplications.

Test Methods per ITU-T K.12, IEEE C62.31 and IEC 61643-311 GDT standards.

Impulse Transverse Delay............................... 1000 V/μs..........................................................< 75 ns

Glow Voltage ................................................... 10 mA................................................................~ 70 V

Arc Voltage ...................................................... 1 A.....................................................................~ 10 V

Glow-Arc Transition Current .......................................................................................................< 0.5 A

Capacitance..................................................... 1 MHz ...............................................................< 2 pF

80 V for Model 2036-15)

10000 A, 8/20 µs...............................................> 10 operations

200 A, 10/1000 µs ............................................> 300 operations

2000 A, 10/350 µs............................................. 1 operation

200 A, 10/700 µs ..............................................> 500 operations

10 Arms, 1 s......................................................> 10 operations

Storage Temperature.................................................................................................................. -55 to +105 °C

Operating Temperature............................................................................................................... -55 to +105 °C

Climatic Category (IEC 60068-1)................................................................................................ 55/105/21

Notes:

• ULRecognizedcomponent,ULFileE153537.

• No model number marking on tube; date code and voltage only: month year digits, xxxV (e.g. 0209 400V).

• The rated discharge current for Mini-TRIGARD™ GDTs is the total current equally divided between each line to ground.

• Surface Mount (SM) parts may show a temporary increase in DCBD after the solder reflow process. Most devices will recover within 24

hours time. It should be noted that there is no quality defect nor change in protection levels during the temporary change in DCBD.

• Operating characteristics per RUS PE-80 and Telcordia GR 1361 available on request.

• Line to Line voltage is approximately 1.8 to 2 times the stated Line to Ground breakdown voltage.

• At delivery AQL 0.65 Level II, DIN ISO 2859.

• Bourns recommends reflowing surface mount devices per IPC/JEDEC J-STD-020 rev D.

(2)

Network applied.

(3)

DC Sparkover may exceed ±25 % but will continue to protect without venting.

Bourns now offers a surface mount (SM) 3-electrode Gas Discharge Tube (GDT) surge protection device. The industry-leading quality

manufacturing techniques. The 2036 SM device is ideal for board level protection of high bandwidth applications such as xDSL,

cable broadband and high speed Ethernet, due to its high energy handling capability, long and stable life performance and low

capacitance of less than 2 pF. Bourns subminiature family of GDTs measure only 5 mm in diameter and are the smallest high

a “crowbar” in creating a short-to-ground circuit during conduction. When a voltage transient surge exceeds the defined breakdown

voltage level of the GDT, the device becomes ionized and conduction takes place within a fraction of a microsecond. When the surge

passes and system voltage returns to normal levels, the GDT returns to its high-impedance (off) state.

Characteristic

ModelNo.

2036-07

2036-09

2036-15

2036-20

2036-23

2036-25

DC Sparkover ±20 % @ 100 V/s

75 V

90 V

150 V

200 V

230 V

250 V

100 V/µs

1000 V/µs

250 V

525 V

250 V

550 V

350 V

500 V

425 V

575 V

450 V

600 V

475 V

625 V

Characteristic

ModelNo.

2036-30

2036-35

2036-40

2036-42

2036-47

2036-60

DC Sparkover ±20 % @ 100 V/s

300 V

350 V

400 V

420 V

470 V

600 V

100 V/µs

1000 V/µs

500 V

650 V

600 V

750 V

650 V

825 V

675 V

850 V

750 V

950 V

850 V

1100 V

(1)

Impulse Sparkover voltage is defined as typical values of distribution.