Technical Data Sheet

RPC-2.92

Calibration Adaptor

Plug/Jack

02S121-K20S3

Rosenberger Hochfrequenztechnik GmbH & Co. KG

P.O.Box 1260

D-84526 Tittmoning

Germany

www.rosenberger.de

Tel.

: +49 8684 18-0

Email : info@rosenberger.de

Page

2 / 3

Electrical data

Frequency range

DC to 40 GHz

Return loss

≥ 32 dB, DC to 4 GHz

≥ 28 dB, 4 GHz to 18 GHz

≥ 25 dB, 18 GHz to 40 GHz

Mechanical data

Mating cycles

≥ 500

Maximum torque

1.70 Nm

Recommended torque

0.90 Nm

Gauge

0.00 mm to 0.03 mm

General standard definitions

For proper operation the vector network analyzer (VNA) needs a model describing the electrical behaviour

of this calibration standard. The different models, units, and terms used will depend on the VNA type and they

will have to be entered into the VNA. All values are based on typical geometry and plating.

50

Ω

Offset Delay

50.0346 ps

Length (electrical) / Offset Length

15.00 mm

Offset Loss

2.70 G

Ω/s

Loss

Environmental data

Operating temperature range

1

+ 20 °C to +26 °C

Rated temperature range of use

2

0 °C to +50 °C

Storage temperature range

- 40 °C to +85 °C

RoHS

compliant

1

Temperature range over which these specification are valid.

2

This range is underneath and above the operating temperature range, within the calibration adaptor is fully functional

and could be used without damage.