XECOM

(9)

XE2486

FCC Instructions

This product complies with Part 68 of the FCC Rules. With each device shipped, there is a label which

contains, among other information, the FCC Registration Number and Ringer Equivalence Number

(REN) for this product. You must, upon request, provide this information to your telephone company.

The mounting of this device in the final assembly must be made in such a manner as to preserve the high

voltage protection between the TIP/RING and the rest of the system. Typically, this may be accomplished

by maintaining a minimum spacing .100 mils between the TIP/RING Traces to the RJ-11C Jack and low

voltage portion of the system. No additional circuitry may be attached between TIP/RING and the

telephone line connection, unless specifically allowed in the rules.

The REN helps determine the number of devices you may connect to a telephone line and still have all of

these devices ring when the number is called. In most, but not all areas, the sum of the RENs of all

devices connected to one line should not exceed five (5.0). To be certain of the number of devices you

may connect to the line, as determined by the REN, you should contact the local telephone company to

determine the maximum REN for your calling area.

If your system causes harm to the telephone network, the telephone company may discontinue service

temporarily. If possible, they will notify you in advance. If advance notification is not practical, you will be

notified as soon as possible.

Your telephone company may make changes in its facilities, equipment, operations or procedures that

could affect proper functioning of your equipment. If they do, you will be notified in advance to give you

an opportunity to maintain uninterrupted telephone service.

If you experience trouble with this device, please contact XECOM at (408) 945-6640 for information on

obtaining service or repairs. The telephone company may ask you to disconnect this device from the

network until the problem has been corrected or until you are sure that the device is not malfunctioning.

The device may not be used on coin service lines provided by the telephone company (this does not

apply to private coin telephone applications which use standard telephone lines). Connection to party

lines is subject to state tariffs.