OPA830

SBOS263B − AUGUST 2004 − REVISED JANUARY 2005

www.ti.com

2

Power Supply

12VDC

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Internal Power Dissipation

See Thermal Analysis

. . . . . . . . . . . . . .

Differential Input Voltage

±1.2V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input Voltage Range (Single Supply)

−0.5V to +VS + 0.3V

. . . . . . .

Storage Temperature Range: D, DBV

−40

°C to +125°C

. . . . . . . . .

Lead Temperature (soldering, 10s)

+300

°C

. . . . . . . . . . . . . . . . . . . .

Junction Temperature (TJ)

+150

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . .

ESD Rating:

Human Body Model (HBM)

2000V

. . . . . . . . . . . . . . . . . . . . . . .

Charge Device Model (CDM)

1500V

. . . . . . . . . . . . . . . . . . . . .

Machine Model (MM)

200V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(1) Stresses above these ratings may cause permanent damage.

Exposure to absolute maximum conditions for extended periods

may degrade device reliability. These are stress ratings only, and

functional operation of the device at these or any other conditions

beyond those specified is not supported.

This integrated circuit can be damaged by ESD. Texas

Instruments recommends that all integrated circuits be

handled with appropriate precautions. Failure to observe

proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to

complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could

cause the device not to meet its published specifications.

PRODUCT

PACKAGE-LEAD

PACKAGE

DESIGNATOR

SPECIFIED

TEMPERATURE

RANGE

PACKAGE

MARKING

ORDERING

NUMBER

TRANSPORT

MEDIA, QUANTITY

OPA830

SO-8 Surface-Mount

D

−40

°C to +85°C

OPA830

OPA830ID

Rails, 100

″

″

″

″

″

OPA830IDR

Tape and Reel, 2500

OPA830

SOT23-5

DBV

−40

°C to +85°C

A72

OPA830IDBVT

Tape and Reel, 250

″

″

″

″

″

OPA830IDBVR

Tape and Reel, 3000

(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website

at www.ti.com.

PIN CONFIGURATIONS

1

2

3

5

4

Output

−V

S

Noninverting Input

+V

S

Inverting Input

A72

Pin Orientation/Package Marking

SOT23−5

1

2

3

4

8

7

6

5

NC

Inverting Input

Noninverting Input

−V

S

NC

+V

S

Output

NC

SO−8

NC = No Connection