IMA-x400 Power Supply Series

Dimensional drawings

LED

VR

J2

J3

J1

PIN2

PIN1

)

+0.02

-0.02

M3*0.5 screw hole (2x)

both sides

M3*0.5 screw hole (4x)

155.0 mm (6.10 in)

15.0 mm

(0.59 in)

144.5 mm (5.69 in)

17.0 mm

(0.59 in)

Fig. 6:

Dimensional drawing IMA-x400-xx

Notes:

● Base plate mounting, M3 thread holes, maximum penetration 4.0 mm (0.16 in) (from outside face of chassis), maxi-

mum torque 0.6 Nm (5.31 lb-in)

● (J1) Input terminal block, Switchlab T14-EMII03, M3.5 screw in 3 positions, maximum torque1.3 Nm (11.5 lb-in)

● (J2) Output terminal block, Dinkle DT-7C-B01W-3943-02, M4 screw in 2 positions, maximum torque

1.5 Nm (13.28 lb-in)

● (J3) Signal connector and Auxiliary DC Output, Mating connector for J3 is either Molex, part number 51110-1450 (with-

out locking ramp), or Molex part number 51110-1451 (with locking ramp). The connector is not shipped with the power

supply unit.

● General tolerance: ±0.3 mm (0.012 in)

9

Data sheet IMA x400 Power Supply Series V2.0 2016-08-09