1-197

1-197

Designed for Rugged Excellence

Industrial IEC 61850-3 20-port managed Gigabit Ethernet

switch

IGS-P9164 Series

IGS-P9164 series are IEC 61850-3 managed redundant ring Ethernet switches. These switches are designed for power substation application and

rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IGS-P9164GF series are IEC 61850-3 managed redundant

ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x1000Base-X optical fiber port with SC connector. IGS-P9164GFX series are IEC 61850-

3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x100Base-FX optical fiber port with SC connector. IGS-P9164GC

series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4xGigabit combo ports with SFP socket. With

completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible)

can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide

operating temperature from -40

interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.

▪

O-Ring : O-Ring is ORing's proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to 250 nodes. The O-Ring r

edundant ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover technology.

Features

Introduction

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch

v1.0a Jul, 2015

IGS-P9164 Series

*NOTE: This function is available by request only

▪ Designed for power substation / Railway application and fully compliant with

the requirement of IEC 61850-3 and IEEE 1613

▪ Support O-Ring (recovery time < 30ms over 250 units of connection) and

MSTP(RSTP/STP compatible) for Ethernet Redundancy

▪

Open-Ring support the other vendor's ring technology in open architecture

▪

O-Chain allow multiple redundant network rings

▪ Support IEEE 1588v2 clock Synchronization

▪ Support IPV6 new internet protocol version

▪ Support Modbus TCP protocol

▪ Provided HTTPS/SSH protocol to enhance network security

▪ Support IEEE 802.3az Energy-Efficient Ethernet technology

▪ Support SMTP client and NTP server protocol

▪ Support IP-based bandwidth management

▪ Support application-based QoS management

▪ Support Device Binding security function

▪ Support DOS/DDOS auto prevention

▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic

▪ Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management

▪ Support ACL, TACACS+ and 802.1x User Authentication for security

▪ Support 9.6K Bytes Jumbo Frame

▪ Support DBU-01 backup unit to quickly backup/restore configuration

▪ Multiple notification for warning of unexpected event

▪ Support DBU-01 backup unit device to quickly backup/restore configuration

▪ Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision)

configuration

▪ Support LLDP Protocol

▪ Rigid IP-30 housing design

▪ DIN-Rail and wall mounting enabled