TMCTX

www.vishay.com

Vishay Polytech

Revision: 26-Oct-17

5

Document Number: 40183

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

Note

• Test conditions per JIS C5101-1

PERFORMANCE CHARACTERISTICS

ITEM

CONDITION

POST TEST PERFORMANCE

Temperature



characteristics

Measure the specified characteristics



in each stage

Specified

initial value

-55 °C

+85 °C

+125 °C

Capacitance

change

-

-10 % to 0 %

0 % to +10 %

0 % to +12 %

Dissipation

factor (%)

49

7

9

510

8

10

612

10

12

Leakage



current



(max.)

Not more

than 0.01 CV

or 0.5 μA

whichever is

greater

-

Not more

than 0.1 CV

or 5 μA

whichever is

greater

Not more

than 0.125 CV

or 6.25 μA

whichever is

greater

Solder heat

resistance

Solder dip:



B case



C, E, F case



Reflow 260 °C

260 °C ± 5 °C



10 s ± 1 s



5 s ± 0.5 s



10 s ± 1 s

Capacitance change

Within ± 5 % of initial value

Dissipation factor

Shall not exceed initial specified value

Leakage current

Shall not exceed initial specified value

Moisture

resistance



no load

Leave at 40 °C and 90 % to 95 % RH



for 500 h

Capacitance change

Within ± 10 % of initial value

Dissipation factor

Shall not exceed initial specified value

Leakage current

Shall not exceed initial specified value

High



temperature



load

85 °C. The rated voltage is applied for

2000 h

Capacitance change

Within ± 10 % of initial value

Dissipation factor

Shall not exceed initial specified value

Leakage current

Shall not exceed 125 % of initial specified value

Thermal



shock

Leave at -55 °C, normal temperature,

125 °C, and normal temperature for

30 min, 3 min, 30 min, and 3 min.

Repeat this operation 20 times running

Capacitance change

Within ± 10 % of initial value

Dissipation factor

Shall not exceed initial specified value

Leakage current

Shall not exceed initial specified value

Moisture

resistance



load

Leave at 40 °C and 90 % to 95 % RH



The rated voltage is applied for 500 h

Capacitance change

Within ± 10 % of initial value

Dissipation factor

Shall not exceed 150 % of initial specified value

Leakage current

Shall not exceed 200 % of initial specified value

Failure rate

85 °C. The rated voltage is applied

through a protective resistor of 1

/V

1 % / 1000 h