2-65

Designed for Rugged Excellence

2-65

IPMC-111PB

Industrial mini type Ethernet to fiber PoE media converter with

1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket

▪ Supports 1 port 10/100Base-T(X) P.S.E. auto-negotiation and auto-MDI/MDI-X

▪ Support Ethernet to fiber or Ethernet to SFP port

▪ Support LFP (Link Fault Pass-through) function

▪ Supports full/half duplex operation

▪

P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts

▪ Supports store and forward transmission

▪ Provided DIP-Switch to setting function

▪ High reliability and rigid IP-30 housing

▪ DIN-Rail and wall mounting enabled

Introduction

IPMC-111PB is a cost-effective solution for the conversion interface between 10/100Base-T(X) and 100Base-FX, it allows you to extend communication

distance by optical fiber. IPMC-111PB supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IPMC-111PB also support Power

over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet

network. Each IPMC-111PB has 1x10/100Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. IPMC-111PB with wide operating

temperature range from -40 ~ 75℃ and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments.

IPMC-111PB also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets,

and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IPMC-111PB will force the link

to shutdown as soon as noticed that the other link has failed, to notice the administrator to react to the situation. Therefore, the IPMC-111PB is reliable media

converter with PoE capability and can satisfy most demand of operating environment.

Connections of the LFP function

Features

Industrial Media Converter DIN-Rail Ethernet to Fiber PoE Media Converter

v2.0 / Dec, 2011

Normal Status

One Line Broken and N/A LFP function : Server always for answer

One Line Broken and LFP Function Enable : Server Can be detect warning event

Waiting

Warning

Link-up

Link-up

Link-up

Link-up

Link-Down

Link-Down

Link-up

Break

Break

IPMC-111PB