* All specifications are subject to change without notice.

Designed for Rugged Excellence

Introduction

Features

Designed for Railway application and fully compliant with the

requirement of IEC 61850-3 and IEEE 1613

Leading EN50155-compliant Ethernet switch for rolling stock

application

Supports 1 port 10/100Base-T(X) auto-negotiation and

auto-MDI/MDI-X

Support Ethernet to fiber or Ethernet to SFP port

Support LFP (Link Fault Pass-through) function

Supports full/half duplex operation

Supports store and forward transmission

Supports relay output for power failed alarm

Provided DIP-Switch to setting function

High reliability and rigid IP-30 housing

DIN-Rail and wall mounting enabled

IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface;

it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation

application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IMC-P111

series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-P111 series with wide

operating environments.

IMC-P111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other

side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the

DIP-Switch to enable the LFP function, then IMC-P111 series will force the link to shutdown as soon as noticed that the

other link has failed, giving the application software a chance to react to the situation. Therefore, the IMC-P111 series

is reliable media converter and can satisfy most demand of power substation and rolling stock application.

IMC-P111FX / IMC-P111P Series

Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/

100Base-T(X) to 1x100Base-FX fiber or 1x100Base-FX SFP socket