Electronic Components Datasheet Search |
|
AD571 Datasheet(PDF) 9 Page - Analog Devices |
|
AD571 Datasheet(HTML) 9 Page - Analog Devices |
9 / 9 page AD571 REV. –8– zero, blanking the previously active port at the same time. Sub- sequently, this second device can be read by the microprocessor, and so-forth. The status lines are wire-ored in 2 groups and connected to the two remaining control pins. This allows a con- version status check to be made after a convert command, if necessary. The ADCs are divided into two groups to minimize the loading effect of the internal pull-up resistors on the DATA READY buffers. with the 2 control bits (which act as outputs), are used to con- trol the 8 AD571s. When a control line is in the “1” or high state, the ADC will be automatically blanked. That is, its out- puts will be in the inactive open state. If a single control line is switched low, its ADC will convert and the outputs will auto- matically go active when the conversion is complete. The result can then be read from the two peripheral ports; when the next conversion is desired, a different control line can be switched to B OUTLINE DIMENSIONS 18 1 9 10 0.310 (7.87) 0.220 (5.59) PIN 1 0.098 (2.49) MAX 0.005 (0.13) MIN SEATING PLANE 0.023 (0.58) 0.014 (0.36) 0.060 (1.52) 0.015 (0.38) 0.200 (5.08) MAX 0.200 (5.08) 0.125 (3.18) 0.070 (1.78) 0.030 (0.76) 0.960 (24.38) MAX 0.100 (2.54) BSC 0.150 (3.81) MIN 0.320 (8.13) 0.290 (7.37) 0.015 (0.38) 0.008 (0.20) CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 16. 18-Lead Side-Brazed Ceramic Dual In-Line Package [SBDIP] (D-18) Dimensions shown in inches and (millimeters) ORDERING GUIDE Model Temperature Range Package Description Package Option AD571JD 0°C to +70°C 18-Lead Side-Brazed Ceramic Dual In-Line Package [SBDIP] D-18 AD571SD –55°C to +125°C 18-Lead Side-Brazed Ceramic Dual In-Line Package [SBDIP] D-18 AD571SD/883B –55°C to +125°C 18-Lead Side-Brazed Ceramic Dual In-Line Package [SBDIP] D-18 5962-8680202VA –55°C to +125°C 18-Lead Side-Brazed Ceramic Dual In-Line Package [SBDIP] D-18 REVISION HISTORY 4/12—Rev. A to Rev. B Changes to Temperature Coefficients Full-Scale Calibration Parameter ...........................................................................................2 Changes to V+ Operating Current Parameter ..............................2 Updated Outline Dimensions..........................................................8 Added Ordering Guide and Revision History Section ................8 ©2012 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D 10739-0-4/12(B) |
Similar Part No. - AD571 |
|
Similar Description - AD571 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |