MC10EL32 MC100EL32

3–3

MOTOROLA

ECLinPS and ECLinPS Lite

DL140 — Rev 3

OUTLINE DIMENSIONS

D SUFFIX

PLASTIC SOIC PACKAGE

CASE 751–05

ISSUE P

SEATING

PLANE

1

4

5

8

A

S

8X

D

M

J

_

–A–

–B–

–T–

DIM

MIN

MAX

MILLIMETERS

A

4.80

5.00

B

3.80

4.00

C

1.35

1.75

D

0.35

0.49

F

0.40

1.25

G

1.27 BSC

J

0.18

0.25

K

0.10

0.25

M

0

7

P

5.80

6.20

R

0.25

0.50

_

_

G

NOTES:

1. DIMENSIONS A AND B ARE DATUMS AND T IS A

DATUM SURFACE.

2. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

3. DIMENSIONS ARE IN MILLIMETER.

4. DIMENSION A AND B DO NOT INCLUDE MOLD

PROTRUSION.

5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE.

6. DIMENSION D DOES NOT INCLUDE MOLD

PROTRUSION. ALLOWABLE DAMBAR

PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS

OF THE D DIMENSION AT MAXIMUM MATERIAL

CONDITION.

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and

specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola

data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”

must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of

others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other

applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury

or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola

and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees

arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that

Motorola was negligent regarding the design or manufacture of the part. Motorola and

are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal

Opportunity/Affirmative Action Employer.

How to reach us:

USA/EUROPE/Locations Not Listed: Motorola Literature Distribution;

JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,

P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454

3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315

MFAX: RMFAX0@email.sps.mot.com – TOUCHTONE 602–244–6609

ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,

INTERNET: http://Design–NET.com

51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298

MC10EL32/D

*MC10EL32/D*

◊