Electronic Components Datasheet Search |
|
FMA219 Datasheet(PDF) 2 Page - Filtronic Compound Semiconductors |
|
FMA219 Datasheet(HTML) 2 Page - Filtronic Compound Semiconductors |
2 / 5 page PRELIMINARY FMA219 X-BAND LNA MMIC Phone: +1 408 850-5790 http://www.filtronic.co.uk/semis Revised: 11/22/04 Fax: +1 408 850-5766 Email: sales@filcsi.com • ABSOLUTE MAXIMUM RATINGS1 Parameter Symbol Test Conditions Min Max Units Supply Voltage VDD For any operating current 6 V Supply Current IDD For VDD < 5V 100 mA RF Input Power PIN For standard bias conditions -5 dBm Storage Temperature TSTG Non-Operating Storage -40 150 ºC Total Power Dissipation PTOT See De-Rating Note below 600 mW Gain Compression Comp. Under any bias conditions 5 dB Simultaneous Combination of Limits2 2 or more Max. Limits 80 % 1TAmbient = 22°C unless otherwise noted 2Users should avoid exceeding 80% of 2 or more Limits simultaneously Notes: • Operating conditions that exceed the Absolute Maximum Ratings will result in permanent damage to the device. • Total Power Dissipation defined as: PTOT ≡ (PDC + PIN) – POUT, where: PDC: DC Bias Power PIN: RF Input Power POUT: RF Output Power • Total Power Dissipation to be de-rated as follows above 22 °C: PTOT= 0.6 - (0.004W/°C) x TCARRIER where TCARRIER = carrier or heatsink temperature above 22°C (coefficient of de-rating formula is the Thermal Conductivity) Example: For a 55 °C carrier temperature: PTOT = 0.6 - (0.004 x (55 – 22)) = 0.47W • For optimum heatsinking eutectic die attach is recommended; conductive epoxy die attach is acceptable with some degradation in thermal de-rating performance (PTOT = 550mW) • Note on Thermal Resistivity: The nominal value of 250 °C/W is stated for the input stage, which will reach temperature limits before the output stage. The aggregate MMIC thermal resistivity is approximately 175 °C/W. • HANDLING PRECAUTIONS To avoid damage to the devices care should be exercised during handling. Proper Electrostatic Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and testing. These devices should be treated as Class 1A per ESD-STM5.1-1998, Human Body Model. Further information on ESD control measures can be found in MIL-STD-1686 and MIL-HDBK-263. • APPLICATIONS NOTES & DESIGN DATA Applications Notes are available from your local Filtronic Sales Representative or directly from the factory. |
Similar Part No. - FMA219 |
|
Similar Description - FMA219 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |