Electronic Components Datasheet Search |
|
ASM2I99448-32-LR Datasheet(PDF) 5 Page - Alliance Semiconductor Corporation |
|
ASM2I99448-32-LR Datasheet(HTML) 5 Page - Alliance Semiconductor Corporation |
5 / 15 page May 2005 ASM2I99448 rev 0.3 3.3V/2.5V LVCMOS 1:12 Clock Fanout Buffer 5 of 15 Notice: The information in this document is subject to change without notice. Table 6. AC CHARACTERISTICS (V CC = 3.3V ± 5%, TA = –40°C to +85°C) 1 Symbol Characteristics Min Typ Max Unit Condition fref Input Frequency 0 350 MHz fMAX Maximum Output Frequency 0 350 MHz VPP Peak-to-peak input voltage PCLK 400 1000 mV LVPECL VCMR 2 Common Mode Range PCLK 1.3 VCC-0.8 V LVPECL tP, REF Reference Input Pulse Width 1.4 nS tr, tf CCLK Input Rise/Fall Time 1.0 3 nS 0.8 to 2.0V tPLH/HL tPLH/HL Propagation delay PCLK to any Q CCLK to any Q 1.6 1.3 3.6 3.3 nS nS tPLZ, HZ Output Disable Time 11 nS tPZL, LZ Output Enable Time 11 nS tS Setup time CCLK to CLK_STOP PCLK to CLK_STOP 0.0 0.0 nS nS tH Hold time CCLK to CLK_STOP PCLK to CLK_STOP 1.0 1.5 nS nS tsk(O) Output-to-output Skew 150 pS tsk(PP) Device-to-device Skew PCLK or CCLK to any Q 2.0 nS tSK(P) DCQ Output pulse skew 4 Output Duty Cycle Using CCLK Using PCLK fQ<170 MHz 45 50 300 400 55 pS pS % DCREF = 50% tr, tf Output Rise/Fall Time 0.1 1.0 nS 0.55 to 2.4V Note: 1. AC characteristics apply for parallel output termination of 50Ω to VTT. 2. VCMR (AC) is the crosspoint of the differential input signal. Normal AC operation is obtained when the crosspoint is within the VCMR range and the input swing lies within the VPP (AC) specification. Violation of VCMR or VPP impacts tPLH/HL and tSK(PP). 3. Violation of the 1.0 nS maximum input rise and fall time limit will affect the device propagation delay, device-to-device skew, reference input pulse width, output duty cycle and maximum frequency specifications. 4. Output pulse skew is the absolute difference of the propagation delay times: | tpLH - tpHL |. Table 7. DC CHARACTERISTICS (V CC = 2.5V ± 5%, TA = –40°C to +85°C) Symbol Characteristics Min Typ Max Unit Condition VIH Input high voltage 1.7 VCC + 0.3 V LVCMOS VIL Input low voltage -0.3 0.7 V LVCMOS VPP Peak-to-peak input voltage PCLK 250 mV LVPECL VCMR 1 Common Mode Range PCLK 1.0 VCC-0.7 V LVPECL IIN Input current 2 300 µA VIN=GND or VIN=VCC VOH Output High Voltage 1.8 V IOH= -15 mA 3 VOL Output Low Voltage 0.6 V IOL= 15 mA 3 ZOUT Output impedance 19 Ω ICCQ 4 Maximum Quiescent Supply Current 2.0 mA All VCC Pins Note: 1. VCMR (DC) is the crosspoint of the differential input signal. Functional operation is obtained when the crosspoint is within the VCMR range and the input swing lies within the VPP (DC) specification. 2. Input pull-up / pull-down resistors influence input current. 3. The ASM2I99448 is capable of driving 50Ω transmission lines on the incident edge. Each output drives one 50Ω parallel terminated transmission line to a termination voltage of VTT. Alternatively, the device drives one 50Ω series terminated transmission lines at VCC=2.5V. 4. ICCQ is the DC current consumption of the device with all outputs open and the input in its default state or open. |
Similar Part No. - ASM2I99448-32-LR |
|
Similar Description - ASM2I99448-32-LR |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |