No.

Item

Specifications

Test Method

Temperature

Compensating Type

See the previous pages

Within the specified dimensions

No defects or abnormalities

C

V0.047µF : More than 10,000MΩ

C

G0.047µF : 500Ω • F

C : Nominal Capacitance

30pF and over : Q

U1000

30pF and below :

Q

U400W20C

C : Nominal Capacitance (pF)

Within the specified tolerance

No defects or abnormalities

Y55 to W125D

Operating

Temperature

Range

Rated Voltage

Appearance

Dimensions

Dielectric Strength

Insulation

Resistance

Capacitance

Q/

Dissipation Factor

(D.F.)

1

2

3

4

5

6

7

8

Using calipers

The insulation resistance should be measured with a DC

voltage not exceeding the rated voltage at 20

D/25D and

75%RH max. and within 2 minutes of charging, provided the

charge/discharge current is less than 50mA.

The capacitance/D.F. should be measured at 20

D/25D at the

frequency and voltage shown in the table.

No failure should be observed when 300% of the rated voltage

(temperature compensating type) or 250% of the rated voltage

(high dielectric constant type) is applied between the

terminations for 1 to 5 seconds, provided the charge/discharge

current is less than 50mA.

Visual inspection

The rated voltage is defined as the maximum voltage which

may be applied continuously to the capacitor.

whichever is larger, should be maintained within the rated

voltage range.

Reference Temperature : 25

D

(2

∆, 3∆, 4∆, B1, B3, F1, R1 : 20D)

High Dielectric Type

B1, B3, F1 :

Y25D to W85D

R1, R7 :

Y55D to W125D

E4 :

W10D to W85D

F5 :

Y30D to W85D

[B1, B3, R1, R6, R7, E4]

W.V. : 25Vmin. : 0.025max.

W.V. : 16/10V : 0.035max.

W.V. : 6.3V/4V

: 0.05max. (C

F3.3µF)

: 0.1max. (C

U3.3µF)

[F1, F5]

W.V. : 25Vmin.

: 0.05max. (C

F0.1µF)

: 0.09max. (C

U0.1µF)

W.V. : 16V/10V : 0.125max.

W.V. : 6.3V : 0.15max.

Item

∆C to ∆U, 1X

(1000pF and

below)

∆C to ∆U, 1X

(more than

1000pF)

R6, R7, F5

B1, B3, F1

E4

1

T0.1MHz

0.5 to 5Vrms

Frequency

Voltage

1

T0.1kHz

1

T0.2Vrms

Char.

1

T0.1kHz

0.5

T0.05Vrms

Continued on the following page.

s Specifications and Test Methods

before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.

• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.

Capacitors